Audi A3 - 8P0920901J - need flash + 24c32

[Labtech24]

Hi
I need full backup cluster

Audi A3
8P0 920 901 J - must be the same

I need CDC3217G and 24c32

[rafal]

what about his thread?
https://www.digital-kaos.co.uk/forums/showthread.php/928760-Audi-A3-Micronas-24c32-need-swap-immo-data

[Labtech24]

what about his thread?
https://www.digital-kaos.co.uk/forums/showthread.php/928760-Audi-A3-Micronas-24c32-need-swap-immo-data
This is wrong soft. In thi topic software is 901D (diesel). I need 901J (petrol)
That's why I opened another topic in a new category

[Labtech24]

This is wrong soft. In thi topic software is 901D (diesel). I need 901J (petrol)
That's why I opened another topic in a new category

[lupu_sandu]

Why you need full? Your cluster is dead?

[Labtech24]

Why you need full? Your cluster is dead?
Yes. ori is dead

[A3fDevil666]

After km repair ? Post micronas dump

[Labtech24]

After km repair ? Post micronas dump
after watter.

The cluster has an DTC internal error.


When the engine is started, the radiator fan runs at full speed. Air conditioning error in the outside temperature sensor. Also in the engine control unit. Internal error in the dashboard. The cluster was flooded with water. I don't know what happened before. I got such a car. I installed a second cluster with the number 901D but it is diesel. The car I have is gasoline

After installing the second meter, there is no problem with the fan and the external temperature sensor

[lupu_sandu]

So your dash is HW faulty not SW

[Labtech24]

So your dash is HW faulty not SW

SW Problem. I read micronas and i2c. Write to another working dasch and the same problem. Problem is SW in micronas or i2c 100%

[jomberykaso]

write this and report back.

[Labtech24]

Still looking flash and eeprom for 8P0920901J. If someone has - I will pay. It must be specifically with a J ending

[Labtech24]

SOLVED - I close the topic.