Need dump a3 8l vdo 8L0920931f

[A3fDevil666]

Hello please help my dump is damaged

[kiszka]

Hello please help my dump is damaged
what happened to make you so red
link to file
https://mega.nz/file/pj5BDaRa#vK6ATjLBkY_cgNjSrPL5tu5rgTcKL406cvuxTVTGx Fc

[A3fDevil666]

sorry vdo dash havw 93c96 eprom your file is for MM4 Dash

[kiszka]

sorry vdo dash havw 93c96 eprom your file is for MM4 Dash

I'm sorry I missed it
this file should be good
https://mega.nz/file/kn41XKAa#phe_eopJt0FH2RFMlCqNvjxsKSlnRNmPfhjGRAeMn-4

[A3fDevil666]

many thanx can u immo data from MM4 to VDO clone if possible org read from MM4 dash postet need this data in VDO dump

[kiszka]

many thanx can u immo data from MM4 to VDO clone if possible org read from MM4 dash postet need this data in VDO dump

it is enough to program the dash using the pin 3474

[A3fDevil666]

Whit the dump is not good see part number and after vdo in right info box
And needle not pass
@kiszka
https://uploads.tapatalk-cdn.com/20211112/d8a01db69d6d402d63fa5fc3ef7f7036.jpg

[kiszka]

Whit the dump is not good see part number and after vdo in right info box
And needle not pass
@kiszka
tell me what hardware you use to write eeprom

[A3fDevil666]

Tl886 Desolderd

[kiszka]

Tl886 Desolderd

This, select the appropriate eeprom type in it for writing
don't let the equipment make you a foolish man
847054

[A3fDevil666]

I chose the 93lc86 from the microchip in the program. that's exactly what it says on the chip ... I'll tested again thanks for your help and time

[A3fDevil666]

Solved tnx