Pcm flash boot cable

[dehacko]

Hello
I have scanmatic 2pro original, and i need pcm boot cable.
Is possible use cable from powerbox? It is same or not?
For module 71
848952848952

[immokill]

Use it
it is same cable module 71 is BOOT option .
Regarfs

[dehacko]

ok thank you

But i must have to too plug in cable 14p600kt06 for GPT1 and GPT2

[al70]

gpt pinout on top of the box

[dehacko]

For module 71 for old power ktm box with 14p600kt06 GPT cable. I set 3,3 V or 5V?

edc17 dimsport pinout GPT0_ grey (GPT1blue) =
14p600kt06 cable GPT1_yellow (GPT2 orange) correct?

[figani]

For module 71 for old power ktm box with 14p600kt06 GPT cable. I set 3,3 V or 5V?

I don´t know....


edc17 dimsport pinout GPT0_ grey (GPT1blue) =
14p600kt06 cable GPT1_yellow (GPT2 orange) correct?

YES...

[datapage]

gpt1=rotation sensor
gpt2=rotation fase
all ecus...
all programers, Kess, ktag, genius, autotuners etc..

tks+ rep =ok

[datapage]

cable scamatick2 pro for pcmflash , ok
obd2=
1=gpt1
2=gpt2
4-5 gnd
6=can
7=k
14=can
16=12v

tks+ rep =ok

[dehacko]

I found on google: k-tag set 3,3V, pcm flash 5V

But I don't know if that is 100% true. Try on old ecu both Voltage (3,3 . 5), and report to you

[datapage]

if car has rotation sensor 3v =3v
if car has 5v=5v rotation sensor.
remember we used rotation and phase pins


but gpt1-2 output is from the scanmatick interface. Not from the powerbox.

pcmflash auto adjust gpt voltage