Log in

View Full Version : BMW E39 528i M52B28TU - Question



PelsonBMW
20th November, 2021, 02:45 PM
Hey , my friend yesterday bought an E39 with M52B28TU engine , car is full stock , stock exhaust, stock engine .

Im wondering why it does not have power , i've driven E39 with 2.8 engine but single vanos and it was way much powerful than this double vanos he bought.

Where is the problem ?

The engine had only 2 lambda errors, ive disabled them until he buy a new ones . Maybe catalyst is clogged ? after you press the pedal it goes like a 2.0 m52 engine , ive checked if it is even a 2.8 but it is marked as 286s2 on engine block so it is 2.8 .

What to check ? what to look for ? , even m52b25tu goes way much better than this 2.8 .

erkor
20th November, 2021, 04:44 PM
Hi.
Make a diagnosis with Inpa and upload screenshots here.

Lambda1
20th November, 2021, 05:11 PM
maye just f**** engine.
Simple it is.
Rest are common diagnostic... lambda, vanos, disa, maf, fuelling system.

Tunerfreak
20th November, 2021, 05:35 PM
very slow fu..g engine

PelsonBMW
20th November, 2021, 07:37 PM
maye just f**** engine.
Simple it is.
Rest are common diagnostic... lambda, vanos, disa, maf, fuelling system.

Hmm doesnt seem to be a bad engine , it's jus like a car weight is 4 tons instead of 1.4 ton :D , I will diagnose it in couple days because friend is truck driver and he is leaving me the car to fix couple things . I will post the results

erkor
20th November, 2021, 09:55 PM
If there is no power up to 3000 rpm, it may be a vanos problem and camshafts to be set.
https://m.youtube.com/watch?v=0eUVF6OLFFgurl]
https://m.youtube.com/watch?v=OUKioU8p8p0[/url]

If there is no power up to 6000 rpm, maybe the cats are blocking.
Maybe the fuel pressure is weak.
Maybe too much fake air.
Lots of problems can be.

Disconnect the maf and do a test drive.
No computer diagnosis,( real value preview), nothing can be said.

alonedark
21st November, 2021, 12:42 AM
Se puede arrancar este coche o no ?

alonedark
21st November, 2021, 12:43 AM
A lo mejor con un achuchoncillo

PelsonBMW
21st November, 2021, 09:23 AM
If there is no power up to 3000 rpm, it may be a vanos problem and camshafts to be set.
https://m.youtube.com/watch?v=0eUVF6OLFFgurl]
https://m.youtube.com/watch?v=OUKioU8p8p0[/url]

If there is no power up to 6000 rpm, maybe the cats are blocking.
Maybe the fuel pressure is weak.
Maybe too much fake air.
Lots of problems can be.

Disconnect the maf and do a test drive.
No computer diagnosis,( real value preview), nothing can be said.


there is no power at all up to 6000rpm , feeling is like a vanos is not working or just poorly accelerates .

alonedark
21st November, 2021, 09:37 AM
Pues este coche ya tiene sus añitos para que no sepas el problema, vamos a llevarlo al cole a ver si allí enter los alumnos lo solucionan

erkor
21st November, 2021, 11:27 AM
To be able to say more, I need to see the real parameters of the engine's work.
Add this screenschots please .

849067
849068
849069


These are just examples of dumps from an engine of a different capacity, please do not compare them to your engine

PelsonBMW
21st November, 2021, 01:13 PM
To be able to say more, I need to see the real parameters of the engine's work.
Add this screenschots please .

849067
849068
849069


These are just examples of dumps from an engine of a different capacity, please do not compare them to your engine

Yeah z as soon as o get the car on my home i.will post logs here