swindler22
22nd November, 2021, 10:26 PM
Hi
We have Volvo V50 2008 2.0 Diesel with Siemens Ecu 5WS40562A-T SID 803A
The car come to our garage with one non working injector.
It was hard to start the car , after when started running on 3 cylinders .
After check all the wiring we decided to clone ecu , we took exactly the same from the shelf and clan it on the bench using I/O Terminal ( full read and write eprom and flash ) Checked all the files the same !
Still the same but at this time battery when flat . From this time another injector off so not running on two on this moment .
Also :
Immo : Steering lock control - non active
Immo : The state of the steering lock - unlocked
Immo : Initial state steering lock - confirmed
Immo : Check of the engine control - no ok
Immo : Condition of the fuel pump - active
Immo : Immo programming - defective
Any one can help us or switch Immo off if its possible , we are using IO Terminal
TiA
Immof the steering lock
We have Volvo V50 2008 2.0 Diesel with Siemens Ecu 5WS40562A-T SID 803A
The car come to our garage with one non working injector.
It was hard to start the car , after when started running on 3 cylinders .
After check all the wiring we decided to clone ecu , we took exactly the same from the shelf and clan it on the bench using I/O Terminal ( full read and write eprom and flash ) Checked all the files the same !
Still the same but at this time battery when flat . From this time another injector off so not running on two on this moment .
Also :
Immo : Steering lock control - non active
Immo : The state of the steering lock - unlocked
Immo : Initial state steering lock - confirmed
Immo : Check of the engine control - no ok
Immo : Condition of the fuel pump - active
Immo : Immo programming - defective
Any one can help us or switch Immo off if its possible , we are using IO Terminal
TiA
Immof the steering lock