PDA

View Full Version : anyone know cheapest place in uk to get a cheap eprom programmer ?



jjcool
11th February, 2010, 05:04 PM
does anyone know a cheap place to buy a cheap eprom programmer in uk to program some 24c16 & 24c32 eproms.

had a search but cant find any cheap programmers looking for somethink like this one KMtronic: USB 24xxx I2C E-Eprom programmer - Microchip, ATMEL (http://www.sigma-shop.com/product/31/usb-24xxx-i2c-e-eprom-programmer-microchip-atmel.html) in uk ?

anyone know any place that sells thm in uk or know where i can buy a cheap programmer to program above eproms.

thankyou

Remapking
12th February, 2010, 08:30 AM
Willem EEPROM Programmer PCB50 + PSOP44 Adaptor ECU UK on eBay (end time 19-Feb-10 21:34:32 GMT) (http://cgi.ebay.co.uk/Willem-EEPROM-Programmer-PCB50-PSOP44-Adaptor-ECU-UK_W0QQitemZ110492612921QQcmdZViewItemQQptZUK_BOI_ Electrical_Test_Measurement_Equipment_ET?hash=item 19b9df7939)

I have used these guys a few times now, next day delivery too :)

kiripe
12th February, 2010, 08:57 AM
If you just want to program those serial eeproms, you can also use SEEprog by elnec. A very good programmer for serial eeproms.

AyceeDeeCee
12th February, 2010, 09:13 AM
I have a Superpro L+ for sale - Will have to check if it does that. It's redundant now as I have Beeprog+

jjcool
12th February, 2010, 11:06 AM
cheers guys

AyceeDeeCee, could u find out if it programs 24c16 & 24c32 chips mate also what sort of price u looking.

seeprog programmer looks ok but expensive, only really want a cheap programmer just to program these 24c ic2 eproms.

i already have a clanzer minisdk which suppost to be able to program these chips there was a mod someware where you could solder a 8 pin din from maplins then solder din wires to underside clanzer minisdk card connections allowing you to program 8 pin dil eproms, but cant find the mod.

now if only i could find the mod it would save me haveing to buy a new programmer :(

Art60
20th February, 2010, 01:33 PM
I have a Superpro L+ for sale - Will have to check if it does that. It's redundant now as I have Beeprog+
Hi AyceeDeeCee,

I'm new here.

I'd like to put my hands in a 27C256 and surely need to program a new one to replace it.

So, I'm looking for a cheap eprom programmer, may you tell me the price you'd want for your SuperPro L+ ?

Thanks !

Best regards.

joesoap112
20th February, 2010, 03:43 PM
I have the Willem Pcb5.0 + software brand new ....will sell at ?40 +postage Thats what it cost me.
Bought it to do my dash 93c56 ...thats done so dont require it any more .

Itsme
20th February, 2010, 04:01 PM
There may be something here for you

24 Series, I2C bus and SPI 93 Series 8-bit serial EEPROM Programmer (3151) (http://www.quasarelectronics.com/3151-24-series-i2c-bus-spi-93-series-8-bit-serial-eeprom-programmer.htm)

There are other diy kit sellers on the net just google

Art60
20th February, 2010, 04:12 PM
There may be something here for you

24 Series, I2C bus and SPI 93 Series 8-bit serial EEPROM Programmer (3151) (http://www.quasarelectronics.com/3151-24-series-i2c-bus-spi-93-series-8-bit-serial-eeprom-programmer.htm)

There are other diy kit sellers on the net just google
Thank you Itsme, but this wont fit my needs, my EPROM is a 27C256 (28pins), and the page you linked me to says :
N.B. 27 series and LC devices are NOT supported by this programmer.

Thank you, anyway.

Oops, may be you answered to jjcool :shot:

Art60
20th February, 2010, 04:23 PM
I have the Willem Pcb5.0 + software brand new ....will sell at ?40 +postage Thats what it cost me.
Bought it to do my dash 93c56 ...thats done so dont require it any more .
I'm sorry, joesoap112, I was on the same way but bought before I read your answer.
eBay help me find one Willem Pcb5.0, new, at ?27 :jiggin: + about ?6 postage fee.

Finally, that's 38? for me, and that's the cheapest and far best bargain for such an interesting device.

Anyway, thank you for confirming this model.

yellowstilo
20th February, 2010, 06:49 PM
i bought my Willem programmer here:

*NEWEST* Willem EPROM Programmer PCB50 EEPROM BIOS PIC on eBay (end time 02-Mar-10 02:58:20 GMT) (http://cgi.ebay.co.uk/NEWEST-Willem-EPROM-Programmer-PCB50-EEPROM-BIOS-PIC_W0QQitemZ250583985521QQcategoryZ36323QQcmdZVie wItemQQ_trksidZp4340.m263QQ_trkparmsZalgo%3DSIC%26 its%3DI%26itu%3DUCI%252BIA%252BUA%252BIEW%252BFICS %252BUFI%26otn%3D10%26ps%3D63%26clkid%3D7982555699 516535503)

very fast shipping, low price and shipping costs, no custom taxes (in my case ).

Alpinesport
20th February, 2010, 08:07 PM
see her and get some good tools

Eprom Programmer - BX40 Bagero (http://www.progshop.com/shop/programmer/BX40/index.html)

joesoap112
20th February, 2010, 09:36 PM
I'm sorry, joesoap112, I was on the same way but bought before I read your answer.
eBay help me find one Willem Pcb5.0, new, at ?27 :jiggin: + about ?6 postage fee.

Finally, that's 38? for me, and that's the cheapest and far best bargain for such an interesting device.

Anyway, thank you for confirming this model.
Ok ..no problem sme place butmine was bundled with a host of adapters !!!! orderered on the 8th got it yesterday .Slow but honest.:wink: