audi a3 crypto , programmer can i use ?

[hollow]

need to change mileage on audi a3 2005 crypto with 93lc86

what eeprom programmer is preffered choice to use ?

would a willem sufiice ?


thanks

[andresfn18]

need to change mileage on audi a3 2005 crypto with 93lc86

what eeprom programmer is preffered choice to use ?

would a willem sufiice ?


thanks
THE VAG COMMANDER IS THE BEST OPTION!
SEND ME YOUR DUMP AND THE VALUE OF YOUR NEW KM MAYBE Y CAN HELP!

[hollow]

only have the clone and it wont dump the eeprom correctly always an invalid size


regards

[drpeter]

only have the clone and it wont dump the eeprom correctly always an invalid size


regards

You need a Rosfar R200 for this cluster and if you want to spend more money buy a Enigma.

[motorsport]

disconect batterie 10 min and conecte 2min and disconect and connect and now make with vag commender normaly it done dirctly let me now fast please

[hollow]

disconect batterie 10 min and conecte 2min and disconect and connect and now make with vag commender normaly it done dirctly let me now fast please



hi this method doesnt work

[motorsport]

with tool you have

[hollow]

hi

i have r250s clone new is it possible to use this or down grade it to r200s by reprogramming ?

[drpeter]

hi

i have r250s clone new is it possible to use this or down grade it to r200s by reprogramming ?

Downgrading to R200S? How do you want to do that :-) ?
You need a R200S for this.

[motorsport]

try with vag commender

[motorsport]

or try with vag dash k can 5.5

[hollow]

only have vag dash k +can 5.1

[hollow]

hi here is only dump i have of dash think it is corrupt though

please check if possible thanks

[andresfn18]

hi here is only dump i have of dash think it is corrupt though

please check if possible thanks

PIN 47508
LET ME TRY WHIT KM

[emi_boy78]

or try with vag dash k can 5.5

Vag Can Commander 5.5
cost 85 euro
Full support for Audi A3/A8 2003+
Security code reading and odometer change by OBDII ;)
:wink:

[motorsport]

are you sure because from 2005 microcontroleur siemems vdo fujitsu???

That's because Siemens-VDO changed the OBDII login code so you cannot enter the service mode anymore.

[motorsport]

Vag Can Commander 5.5
cost 85 euro
Full support for Audi A3/A8 2003+
Security code reading and odometer change by OBDII ;)
:wink:
are you sure because from 2005 microcontroleur siemems vdo fujitsu???

That's because Siemens-VDO changed the OBDII login code so you cannot enter the service mode anymore

[kivh]

Vag Can Commander 5.5
cost 85 euro
Full support for Audi A3/A8 2003+
Security code reading and odometer change by OBDII ;)
:wink:

Hello Emi_boy78 and all others!
I heard about this tool, have you tried it yourself?
Do you change odometer in the cluster or in the Engine ECU with version 5.5?
I have vag commander 1.4 but it doesn't seem to do it... I only saw the HMI and not conencted it on my car..
I have an Audi A3 quattro 2.0L 140Cv of november 2005 with engine ECU Bosch EDC16 normally...
To perform the odometer change, do you connect the tool to the OBD plug on the car or you need to take out the ECU and connect to it only?
if on the car OBD plug, when you connect, what position should be the key on? Does the battery need to be unplugged?
sorry for all these questions... :dontknow:
If it doesen't work with VAG commander 5.5, I heard about VAG commander 6.3, anyone has tsted it, has it?

Sorry for the long message :ciao:

This forum looks great!

Thanks for any answer!

/Kivh

[Floyd]

I need to replace dash on up to 8 A3 2005 with crypto dash 93lc86c eeprom and need a reliable tool that will read eeprom from old cluster and programme to second hand unit.

Anyone can confirm what will work?

I have tried vag K + can 1.4 works on older cars but not on crypto dash's.

Just seen this AUDI-VW immobiliser Login Code (Secret Key Code) Reader and Key Learning by diagnostic (http://www.codecard.lt/immo/audi-vw/audi-vw-immobiliser-login-code-secret-key-code-reader-and-key-learning-by-diagnostic/prod_20.html)

anyone know if it works?

Thanks

[Rito]

[QUOTE=emi_boy78;483248]Vag Can Commander 5.5
cost 85 euro
Full support for Audi A3/A8 2003+
Security code reading and odometer change by OBDII ;)

You have tested this tool??

[cucaracha]

For change in dash use carprog.
In ECU read the 95320 chip and change in dump.
Tested by me on that car.

regards,
cucaracha

[oep]

Can xprogm read this 95320 correctly?

[isak2009]

You need only R200 programmer