PDA

View Full Version : Audi M3.2 immo off



stanislav georgiev
7th December, 2021, 05:18 PM
8D0 907 557 HX 0 261 203 941 eeprom 24C02 Hello, can anyone help with a tested property solution. Thank you

walmaj
7th December, 2021, 05:35 PM
hello your file

pass pm + rep + thanks

stanislav georgiev
8th December, 2021, 07:10 AM
I don't like members like you, you got a reputation right now and thank you, but I still don't have a password for the archive. Can anyone else share a tested solution.

lupu_sandu
8th December, 2021, 07:18 AM
Solution in eeprom will be temporally.
Permanent solution is in 27c010.
Nevertheless if you want to make off in eeprom modify $0C and $4C in 50 and remove immobox

al70
8th December, 2021, 07:24 AM
hi stanislav, i haven't tested this solution but you can try while you wait for the password, i think it's ok, goodluck
unplug immo box

stanislav georgiev
8th December, 2021, 08:13 AM
Thanks colleagues. I lit the car with my solution, I did not cut the immobox. I made 10 starts, the car started, can you tell me if this decision is temporary. Thank you.

budata
8th December, 2021, 08:46 AM
Hello colleague, disconnect the terminal for a short time and hook it up if the car starts, everything is fine ...... It is best to disconnect the immo box ....

stanislav georgiev
8th December, 2021, 09:36 AM
With my decision, when disconnecting the immobox, the car does not start, and the attached socket starts repeatedly. I'm not sure how to proceed.

budata
8th December, 2021, 09:44 AM
852882 .....immo box off......

stanislav georgiev
8th December, 2021, 10:30 AM
852882 .....immo box off...... Thanks colleague, I wrote your solution the car starts with the socket on the immo box removed. Thanks to everyone, I think this is the method of working in the forum, mutual assistance.

kiszka
8th December, 2021, 10:41 AM
Thanks colleague, I wrote your solution the car starts with the socket on the immo box removed. Thanks to everyone, I think this is the method of working in the forum, mutual assistance.

friend, I haven't done such tests but I suspect it won't work well for too long

stanislav georgiev
8th December, 2021, 03:23 PM
friend, I haven't done such tests but I suspect it won't work well for too long I did something extra, write file on a new eeprom 24C04WP write protect , before soldering I raised 7 pins on 8 pins. I hope the car doesn't come back in .