View Full Version : Mazda 3 2005
gobe
9th December, 2021, 09:50 AM
Hello
Mazda3 ECU 0281011618 3U71-12A650-SA
need synchronization ECU < > DASH
Thanks
Ninjor s
9th December, 2021, 01:23 PM
Hello
Mazda3 ECU 0281011618 3U71-12A650-SA
need synchronization ECU < > DASH
Thanks
Message member called KISZKA only him I've seen so far.
kiszka
9th December, 2021, 02:09 PM
Hello
Mazda3 ECU 0281011618 3U71-12A650-SA
need synchronization ECU < > DASH
Thanks
https://mega.nz/file/IvxhXaID
gobe
13th December, 2021, 10:18 AM
kiska you are the master, the car work again !!!
Thank you very much for help
eliselis
6th April, 2022, 02:30 PM
Hi. Can anybody help me with mazda 3 immo synchronization.
Ecu its bosch0281011618
Thanks
kiszka
6th April, 2022, 07:43 PM
Hi. Can anybody help me with mazda 3 immo synchronization.
Ecu its bosch0281011618
Thanks
the eeprom reading is incorrect
you read the eeprom when it is mounted on the pcb
eliselis
6th April, 2022, 10:42 PM
Hi. I read eeproms desoldered from pcb. As normaly vith TL866A programmer. What can be wrong?
kiszka
7th April, 2022, 12:16 AM
Hi. I read eeproms desoldered from pcb. As normaly vith TL866A programmer. What can be wrong?
maybe the manufacturer is wrongly selected, maybe 8 bit or 16 bit
eliselis
7th April, 2022, 07:44 AM
Bad readed its dash eeprom?
eliselis
7th April, 2022, 09:31 AM
I read it with carprog now and looks right. I mean synchrinization its ok.
Its it right?
kiszka
7th April, 2022, 09:42 AM
I read it with carprog now and looks right. I mean synchrinization its ok.
Its it right?
read is ok
https://mega.nz/file/N7A0EIbY
eliselis
7th April, 2022, 02:55 PM
Thanks, dump work fine.
skcelectronic
7th April, 2022, 04:46 PM
Hi,
Mazda 3 2008
Can someone sync the immo ecu with the control panel after discharging the battery?
I read 93c56 from the control panel and 95160 from the ECU
Thank you
kiszka
7th April, 2022, 10:34 PM
Hi,
Mazda 3 2008
Can someone sync the immo ecu with the control panel after discharging the battery?
I read 93c56 from the control panel and 95160 from the ECU
Thank you
https://mega.nz/file/prgXAIQA
skcelectronic
8th April, 2022, 11:24 AM
Hi
thank you sir
the car works
talalimmo
9th September, 2023, 07:26 PM
please mate I have mazda 2008 coming from another work shop no start
the epprom was removed and data is corrupted , can you help me getting it alive again
thanks
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.