Fiat MJD 8F3 mileage

[vopi]

Hi,

please help me with changing of mileage in ECU MJD8F3 Fiat Ducato

Old value: 179 952
oil change: 138718

new value: 148 200

please change in all positions

thanks for help

[gogalv]

Old value: 179 952
oil change: 138718


More values than you specified.........

[vopi]

OK and could you change all values for me?

[vopi]

nobody know how to change it? thanks

[156alfa]

hello friend
as already said many times
if you want to be helped, attach a tester's feedback to everyone
the parameters and after you will be helped
Greetings from Italy

[vopi]

Hello,

I put all information what I have. The car is fiat Ducato 2.3JTD 130Hp EU5+
ECU: MJD 8F3.BN/HW10W/3045-BN08

thanks

[156alfa]

hello friend,
I am referring to the parameters of all odometer
and not to the fabric of the car and the id of the ecu
for this time I made you file
Try and repost
Greetings from Italy

[vopi]

thanks for help, please which SW you used for corection?

[vopi]

I used your mod of eerpom but Ifter that I have error P0601-45 Control unit Faulty (EEPROM)-program Memory Failure. I think problem is with checksum. Is there any solution for this or I have to mask this DTC?
Km is OK

[156alfa]

hello friend
try another eeprom it may be overheatedall cs are ok
As for the software I use they are:
windows calculator and brain.
Greetings from Italy

[vopi]

I didn´t touch eeprom because I red this ECU in boot mode via pinout - original FGtech flasher can read full backup eeprom and Flash via pinout without opening the ECU. I used many times for cloning and without problem.
I use your mod and I have error P0601, when I use original eeprom DTC is out. So the roblem must be in CRC.

[vopi]

sorry 156Alfa, there must be problem with CRC in eeprom, I tried everythink but still with the same result - P0601-45. When I use backup eeprom all is OK. could you help me?

[jonnny]

sorry 156Alfa, there must be problem with CRC in eeprom, I tried everythink but still with the same result - P0601-45. When I use backup eeprom all is OK. could you help me?

here is new ...
PM for PASS

[draganelektricar]

km= reset
oil= reset
ch= ok
pass= pm

[vopi]

@draganelektricar - your file works fine and CRC OK, thanks

@jonnny - km OK but still problem with CRC and DTC P0601

thanks to all for your help

[Panathaole]

@draganelektricar - your file works fine and CRC OK, thanks

@jonnny - km OK but still problem with CRC and DTC P0601

thanks to all for your help


hi

did you try to delete the error? Car start? i had some times that problem and i delete the error, drive the car for a awhile and after everything was ok......

[gogalv]

We must do the right thing, with the right CS, and there will be no mistakes.