PDA

View Full Version : 2021 Honda Civic 77960-TLA-A420-M4



norbisko
14th December, 2021, 06:50 PM
HEY GUYS

I used upa to read the dump.
I read is as 77960-TLA-A240-M4 SPC56AP54L3
Read ok,
but during verifying errors showed up

please someone check it for me please

Please find attached 2 original dump reads
one cleared / seems as bad dump

I tried to rewrite original, not working...

THANKS

superjet
15th December, 2021, 03:31 AM
your clear file,report.
\pm

norbisko
15th December, 2021, 07:34 PM
I have a problem writing the data.
I tried using external power supply . still no help. read fine but does not write.
any idea

fuzz1
16th December, 2021, 02:06 AM
Hi
Check your connections again. What pinout are you using?

norbisko
16th December, 2021, 02:06 PM
Hi
Check your connections again. What pinout are you using?


Please see attached

fuzz1
16th December, 2021, 02:36 PM
The attachment is to me misleading. Follow the pinout from the chip.

norbisko
16th December, 2021, 02:58 PM
The attachment is to me misleading. Follow the pinout from the chip.
I was able to read it fine
just cannot write

fuzz1
16th December, 2021, 04:10 PM
Reading and writing are different

norbisko
16th December, 2021, 04:59 PM
Reading and writing are different

Can you share a pin out you use for this module?

fuzz1
16th December, 2021, 06:37 PM
Pin out is the same. Check p2 TDi. It's probably not soldered in the right place

donchester
17th December, 2021, 02:58 AM
Hi do you have the pin out for upa for this honda?

fuzz1
18th December, 2021, 06:29 AM
Hi do you have the pin out for upa for this honda?


The pin out is in the above posts. You will get a clearer pic from cpt