Volvo D5 remap issues - DPF, EGR off and a 50/50 file - WGDC goes to 0%.....

[Cossie7]

Evening all,

Would appreciate some help with this if possible.

Had a file done for a 2010 Volvo V50 D5 and as soon as the file is put on there is no boost with the WGDC showin 0% constantly.

The actuator cannot even be actuated through diagnostics its just dead.

Putting the ORI back on and it works again?

would it be possible for some kind gentleman to have a look at the file and try and identify the issue?

Thanks in advance.

Cossie7

[Cossie7]

Also gettin gchecksum error when reading codes with MOD file on but checksum was carried out. Think this may be a red herring as looks like it is a common occurance with volvos that a 7700 code is flagged after remap due to CEM numbers not matching....

[pike]

Had a file done for a 2010 Volvo V50 D5 and as soon as the file is put on there is no boost with the WGDC showin 0% constantly.

The actuator cannot even be actuated through diagnostics its just dead.

Putting the ORI back on and it works again?

would it be possible for some kind gentleman to have a look at the file and try and identify the issue?



Hi,

where you get this garbage?

use original and not torment the car

[Cossie7]

take it that the remap file is no good?

Cant use ORI anymore as dpf and EGR are now gone unfortunately

[Cossie7]

Also whats peoples opinions on the MOD file?