VW Amarok 2013 JC nec+95320 immo data

[Andreastech81]

Hello DK friends i need a little help here with an Amarok 2013, dash No 2H0920863C Johnson Controls

car has already 2 keys, and customer bought a new original HELLA, to have second remote, i am trying to read PIN and CS from dash and my IM608 can't support ...

i read immo data by OBD with fvdi 2014 but i can't find correct CS 12digit and PIN that Autel is asking,

i will upload the dump i read ... if someone can find me CS and pin

thank you

[H2Deetoo]

IMMO data is encrypted in the eeprom and you need key from flash to decrypt it.


Rgs H2Deetoo

[jair huerta]

Do you have a key programmed to be able to read the immo data?

[jair huerta]

or you can read the ecu to see if we can get the cs from there

[Andreastech81]

I have read engine ecu to get immo data

And the resault are the same as FVDI.

Same pin same cs ...
The point is when i put that CS to make dealer key
Autel is telling me that is wrong and it should be 12bytes digit HEX

I think that immo data in this car are somekind of crypto
I don't have any other idea what alse to do ... hmm ..

[H2Deetoo]

The cluster uses 12bytes CS.
The ecu uses 6bytes CS.

So you can never read complete 12 CS bytes from ecu, only 6 or 7 at most.
Please upload your ecu eeprom (+flash if needed) out of interest.

For my sw it is no problem to read all good immo data from PQ JC cluster.
You just need to find a compatible canbus cable. Borrow one or buy one, they are found very cheap.


Regards,
H2Deetoo

[Andreastech81]

I will upload the read i done from the ecu

ECU 03L907309AC EDC17C54 read

flash and eeprom

[H2Deetoo]

This is the immo data from your ecu:
VIN = WV1ZZZ2HZDH015503
IMMOID = 00000000000000
CS = 7EEEDE426180
MAC = 9111AAB5
PIN = 20063
PC = FE

As you can see you only have 6 CS bytes, but you need 6 more from the cluster to be able to add keys.

[Andreastech81]

Yeah, that is the data FVDI and Autel IM608 gave me.

Hmm ... :/

[H2Deetoo]

You either need to find someone with a suitable tool to read these JC clusters, or find/borrow/buy a suitable cable to be able to use my tool.
Only then you will get the full 12 CS bytes which you need.


Regards,
H2Deetoo

[Andreastech81]

ok .... update about this Amarok 2013 ...

with a big help from my friend H2Deetoo,

we read the correct immo data

and after i was able to make "dealer key" and add it correct to the car ...

I want to thank H2Deetoo for your time and your help

[Dragan78]

Hi, I have same JC cluster and cant read it.
Mr. H2Deetoo (https://www.digital-kaos.co.uk/forums/member.php/432116-H2Deetoo) can you help me with this programm?(not for free)