is it still possible to do a Peugeot Boxer cluster with diga

[martiboy]

Hi everyone is it still possible to do a 2008 Peugeot Boxer cluster with the diga. and is it still done using the 95040 board and the Peugeot Boxer menu or will there be any bsu unit involved thanks again for all your help

[carbandit]

lf is the new style with the 95040 eep similar to citreon relay then no and there is no bsi to worry about

[drpeter]

lf is the new style with the 95040 eep similar to citreon relay then no and there is no bsi to worry about


If you have Fiat km tool you can do it by OBD2, same as Ducato. Should be 95080.

[thedj]

that's right peter

[melcool]

Hi everyone is it still possible to do a 2008 Peugeot Boxer cluster with the diga. and is it still done using the 95040 board and the Peugeot Boxer menu or will there be any bsu unit involved thanks again for all your help

Try ONLY if it reads the correct value!And save before!!!!

[martiboy]

thank you i will give it a try and let you know how i get on thanks again

[melcool]

thank you i will give it a try and let you know how i get on thanks again

If you get programming error like...data not equal...ignore it(at least in my case) is ok!!! but make a backup of original with programmer and DIGA !!! Most important eeprom OFF the board!!!