View Full Version : Toyota highlander immo light flashing
Kalectro
5th January, 2022, 07:05 PM
Hi
I have a Toyota Highlander 2012 Engine 1ARFE.
After some work on the Air Conditioner system, the vehicle refused to start.
On Diag, no code in the engine, one code in the immobiliser system:
B2796 "No communication in immobiliser System"
Immo light start flashing when ignition is on.
Please help me solve this.
ngakson2002
5th January, 2022, 09:38 PM
Hello mte
Have you Checked fuse, wiring, and Key amplifier at the ignition switch.If not give these components a quick check that may help Prior other diagnostic.
Best Regards
Kalectro
6th January, 2022, 04:30 PM
Hi ngakson2002,
I checked the fuses the fusebox, the key amplifier power and the wiring. I don't know why the immo light srill blinking
Kalectro
6th January, 2022, 04:59 PM
I have some news. I tried to read the key with my zedbull but the transponder is not detected. I try with xtool to add new key 4d67. On ignition off the immo light stays on, no blink. On ignition on, the light start to blink after 3 seconds. Vehicle won't start.
ray-ray
6th January, 2022, 05:37 PM
Car is in programming your using the wrong chip…. In the USA region that calls for a “G” 4D72 that your problem..
Kalectro
7th January, 2022, 09:18 AM
Car is in programming your using the wrong chip…. In the USA region that calls for a “G” 4D72 that your problem..Thanks, I will try to get it.
Sent from my TECNO KD7h using Tapatalk
Kalectro
13th January, 2022, 12:10 PM
Thanks. The car started with a G chip transponder.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.