hi i need HELP , TOYOTA WIGO / Agya / Ayla DAIHATSU pinout - iprog+ MB96F001YB

[szeeonn]

hi guys , my iprog+ only show ANOTHER VERSION of toyota WIGO , which is HIGH SPEC dash odometer

but my dash a little Different compare to the instruction from iprog+

Anyone can help me on the PINOUT pleaseeeee

thank you ....

[Geryy]

disassemble dash at other side. and connect to processor

[szeeonn]

disassemble dash at other side. and connect to processor

is there anyway to connect ON THE Board and change mileage ?

like the instruction from iprog ???

the PROCESSOR pin is very small and very near , lollll

i can pay for this service , anyone can help please

[szeeonn]

hi guys , my iprog+ only show ANOTHER VERSION of toyota WIGO , which is HIGH SPEC dash odometer

but my dash a little Different compare to the instruction from iprog+

Anyone can help me on the PINOUT pleaseeeee

thank you ....

how i wish someone can share me the pinout

[Cllau]

use search don't be lazy & stop being a leech! Member since 2011 only taken not given to anyone...!!!!!!!!


https://www.digital-kaos.co.uk/forums/showthread.php/2-FORUM-RULES?p=2&viewfull=1#post2


36. And finally,DK is a sharing community ,which means we all give a bit and take a bit.Any serial freeloaders/leeches will be removed from the site.

[Bens]

here it is 861337

[szeeonn]

here it is 861337

i appreciate because u help me when i need your help , terima kasih

but when Read lower flash , the iprog ASK ME TO "RETRY" OR "ABORT "

Why like this ?

[szeeonn]

use search don't be lazy & stop being a leech! Member since 2011 only taken not given to anyone...!!!!!!!!


https://www.digital-kaos.co.uk/forums/showthread.php/2-FORUM-RULES?p=2&viewfull=1#post2

hi sir


36. And finally,DK is a sharing community ,which means we all give a bit and take a bit.Any serial freeloaders/leeches will be removed from the site.


hi sir , to be frank i already search this for many days , i search using google , i search using digital kaos website

i saw a lot topic regarding this car , But they didnt post the pinout , i message them but they asked me to ask in forum

i try my best to search but still No result

I can assure you i already search using my best , but my skill still not that good because i am new in computer things

I hope you can give me a chance to proof that i am a useful person to you ,

lastly i am sorry and i hope you can forgive me , thank you , i am sorry

[szeeonn]

thanks for all the reply , i will appreciate it

[uchu88]

what (iprog) version are you using ..
i'm indonesian ,
I've tried it before (toyota agya)(iprog version 5) it's work872647

872648

872650

[szeeonn]

what (iprog) version are you using ..
i'm indonesian ,
I've tried it before (toyota agya)(iprog version 5) it's work872647

872648

872650

terima kasih , i am from malaysia

xxxxxxxxxxxxxxxxxxxxx

[stevsteven]

what (iprog) version are you using ..
i'm indonesian ,
I've tried it before (toyota agya)(iprog version 5) it's work872647

872648

872650

Hello what do you use for turn on the speedometer without connect it to the car

[Treeoflife]

B+, IG and GND pins using external 12V, battery pack, battery or power supply.

[stevsteven]

B+, IG and GND pins using external 12V, battery pack, battery or power supply.
i see, thankyou very much