Toyota Rav4 smartbox

[marcinekp26jon]

Hi mate,
Please need repair my files or good pair virgin dump for rav4 (id code + ecu agregation), id code dump is corrup by skp900 when i try to reset system,
firstly i read read smart box add key so remote no worked,
so when i try to reset system by obd, after 16 min system off ,
i rewrite smart box with new dump again, contact open and car not start again.
Smart box 89300-42021 Immo 89784-42031

[marcinekp26jon]

I renev my request.

[askkey]

Try and report.
Both units virgin, after key programming they require syncing by shorting OBD pins 4 and 13 for 45 min with ignition on.

[marcinekp26jon]

does not work the ignition cannot be turned on

[marcinekp26jon]

I renev my request

[askkey]

Do you have communication with the module after connecting it ?

The module is in the after sale mode and should accept the next programmed keys as master. Even if you can not turn the ignition on if you can communicate with the modules then you should be able to program the keys without issue. The official AVDI procedure requires you to NOT TOUCH the start button and only keep the driver door open and enter the key programming procedure as is, with the dash off, after connecting both renewed modules and restoring power.

The other option is for you to find other dumps somewhere on the forum and either post them here or send them to me via PM and I will renew them.

does not work the ignition cannot be turned on

[marcinekp26jon]

Please try witth these files.

[askkey]

Please try witth these files.

Try and report.

I included the procedure in the manual as well.

[marcinekp26jon]

not work cannot comunication with smartbox