PDA

View Full Version : EOBD-1260 (Galletto clone) and sharan



hartteich
14th February, 2010, 10:15 PM
I actually try to readout my ECU using the Galletto clone EOBD-1260. I read the ECU DATA successfully but I was not able to readout the EEPROM/Flash contends.
I choose VW 1900 BOSCH EDC 15P 29F400 / Sharan PD 1.9 and started the readout:
But the readout stops after 42%! (errore SK1 - Errore seed key)
I use the New_Serial.exe program. Maybe someone has some ideas or useful hints. Best regards.

xbyte
15th February, 2010, 02:58 AM
Try remove the fuse for the instrument cluster before reading.

chli1976
15th February, 2010, 11:38 PM
From sharan you must read the ECU on bench

easytech
15th February, 2010, 11:54 PM
Or it is an old ecu with odd/even eprom.

gunnar-tdi
6th April, 2010, 03:57 PM
Did it work?? I?ve got the same problem! EOBD1260 and Soft New Serial! But it doesnt work in the Car and it doesnt work on Bench!!

dimitar
6th April, 2010, 04:37 PM
If the ecu has two eproms HHH and LLL it doesnt work. Dont try.

gunnar-tdi
6th April, 2010, 08:00 PM
Oh, what the Hell!!! My first Post and i forgot the most important things ever, the Car is an Sharan 2004, ECU-ID 038906019BH, Engine Code ASZ, Bosch Nr. 0281011199 and SW Version 1591!
The Car should work, i think the Cable is not OK! Perhaps i will send it in the next days to my Supplier!

kevfield
6th April, 2010, 09:18 PM
Serial Proc.: FLASH_0017 VAG TDI BOSCH EDC15P+ 29F400 Key type: KEY6100A Chksum algorithm: E40 Progr. points: 50 SW: 038906019BH 1591
100% work with galletto as xbyte says remove cluster fues

avtonega
6th April, 2010, 09:34 PM
I always read EDC15 on bench...

Manual attached

rappttor
7th April, 2010, 08:14 PM
this car shou work with galetto clone with no problems, done several untill now; yes you may encounter some problems with ecu on the car, so for safety take it directly to the pins...
if it doesnt work your clone galetto is not ok

soldering will do the job also :deal:

etronic2
13th April, 2010, 09:16 AM
Read it as VW 1.4TDI EDC15P slow

No problem with SK, reading and writing all OK just a bit longer....

Nozza78
13th April, 2010, 12:48 PM
Hi I'm trying to upload an ABT Tuned map to my mk4 golf 18turbo 2002 all the hardware an software numbers are exact. But my galletto will only flash 36% and comes up error.but it will flash the original ecu file back on no problems. Can anyone help

ruipalmeida
3rd June, 2010, 02:19 PM
Hello

I have the same problem with one passat TDI, sometimes makes communication but can never do until the end.

rcsebulba
20th June, 2010, 11:39 PM
hi, my car is an SHARAN 1.9 Tdi 2005 , with EDC15P+ and AUY engine , i have try to download the flash with an KWP2000 but i don't find the Instrument cluster fuse or fuses , if someone knows were they are or another way to disable the instruments please reply

rsibiza
23rd June, 2010, 07:06 AM
Hi I'm trying to upload an ABT Tuned map to my mk4 golf 18turbo 2002 all the hardware an software numbers are exact. But my galletto will only flash 36% and comes up error.but it will flash the original ecu file back on no problems. Can anyone help


Dont you think your ABT File is copy protect?
Me i am sure,and more sure if you tell with ori file no problem.

rsibiza
23rd June, 2010, 07:08 AM
Hello

I have the same problem with one passat TDI, sometimes makes communication but can never do until the end.


If sometimes connects,sometimes doesnt...it may be an HW error of flasher...Pull up resistor error...

rsibiza
23rd June, 2010, 07:10 AM
hi, my car is an SHARAN 1.9 Tdi 2005 , with EDC15P+ and AUY engine , i have try to download the flash with an KWP2000 but i don't find the Instrument cluster fuse or fuses , if someone knows were they are or another way to disable the instruments please reply


Unmount the ECU,in sharan is well easy to unmount,try reading on bench.

If no more possible,unsolder 29F400 and flash with paralell programmer

kovacsgergo2
10th September, 2010, 08:02 PM
hello i have one sharan 1.9 tdi . auy........i would like to make one chip tunning ...with kwp2000....but i dont know how..help me pleasa

Antik74
12th April, 2012, 07:42 PM
Hello! I too could not consider and write down an insertion yet have not erased all errors after that all was read and has registered by means of Galletto 1260.

Antik74
12th April, 2012, 08:00 PM
Try to choose VW 1400 BOSCH EDC 15Pa 29F400 and all at you will turn out