PDA

View Full Version : Ford ka bcm


radiosolutions
24th January, 2022, 10:08 PM
Ford ka 1.2. 2009 reg. Delphi bcm is water damaged. Will start but many functions will not work. Got secondhand bcm same part numbers. Eeprom i removed from original bcm to secondhand but car will not start. Need to also read flash in processor. Can anyone help how to do this. How do i read flash if possible and what programmer.
Weasel3
25th January, 2022, 12:47 AM
This would be Fiat 500.
So Smok or Ioterminal, would probably help you out.
And I guess in these days, many other programmers also.

Maybe need to do some proxy alignment, in some cases.
smokey08
25th January, 2022, 12:49 AM
I have cloned these with vvdi prog. Clone both the nec and the 93c86.

Sent from my Pixel 5 using Tapatalk
radiosolutions
25th January, 2022, 08:25 AM
Anyone got a pinout on pcb to read nec please
radiosolutions
25th January, 2022, 08:29 AM
Does anyone have pinout to read nec please. Picture attached
Bllinda
25th January, 2022, 08:33 AM
Upload damp mw-28000766


Ford ka 1.2. 2009 reg. Delphi bcm is water damaged. Will start but many functions will not work. Got secondhand bcm same part numbers. Eeprom i removed from original bcm to secondhand but car will not start. Need to also read flash in processor. Can anyone help how to do this. How do i read flash if possible and what programmer.