How to read Ecu 16u1

[slavisa988]

Touareg 2.5tdi 2005
Ecu 16u1
070906016BL
I have kess v2 and mpps v18. With both diagnostics i can not enter to memory..
Does anyone knows pin of BOOT for this ecu to try somehow via boot mode and tricore to enter? Thanks in advice

[bodzio012]

There is BDM points. You need to galetto, ktag or something what read by BDM, but write what error do you have?

[isavrseno]

you can read this ecu via obd full flash and eeprom content with fvdi but if ecu is bricked and not communicate with diag tools then you need to open it and read bdm

[slavisa988]

There is BDM points. You need to galetto, ktag or something what read by BDM, but write what error do you have?
Yeah I saw bdm points, i have mpps and kess v2 and i thougth there is BOoT mode and to do like that bUt nah.. Somebody before do egr off and dtc check engine off permanently. I would like to bring check engine light back but seems that first I have to buy galleto or ktag

[slavisa988]

you can read this ecu via obd full flash and eeprom content with fvdi but if ecu is bricked and not communicate with diag tools then you need to open it and read bdm
With kess i can not read ID of ecu but with mpps can read only ID and that is it