CHEV CRUZELS 1.8

[Qenzo]

Hello House
Anyone has an idea if it is possible to plug n play a lockset for Chevrolet CruzeLS 1.8 2010
If so, what modules should I get.
The ECM is bad and I got another ECM but upon swapping the flashes the car didn't start still and I immo offed and still it don't work. No one near has proper tools to program it.

[filutek]

Read BCM and ECM.

[Qenzo]

Read BCM and ECM.

Hi Filutek
I read BCM and then what do I do with those details. Copy it to the new modules? The ECM data in the flalsh AM29F800 is actually corrupted I had already read such.
I am at a stage am looking for a complete lockset so I want to know how I proceed from there.

[filutek]

Read files from BCM and ECM share here. What ECM?

[Qenzo]

Thank you
I will share the files tomorrow.

[Qenzo]

Hi Filutek, the file from BCM is here.
The engine is 1,8 with these park numbers
GM 25181280
5WY1H12A
76.1

[Qenzo]

This is the BCM data, The ECM data is corrupt

[filutek]

Hi Filutek, the file from BCM is here.
The engine is 1,8 with these park numbers
GM 25181280
5WY1H12A
76.1


Simtec 76.1 .... read full flash.

There are two keys in the BCM, but only one is programmed. Does it show mileage or dashes on the dashboard? What's your problem?

[Qenzo]

The ECU is dead so the car won't start, I found another ECU and swapped the flashes, still it didnt work, I immo offed the donor ECU and I got the B0389A FAULT which was about Environment Identification.
On searching about that I learnt GM discourages swapping of modules, so that is why I thought to get a lockset and wanted to know what modules I should buy and whether it is plug n play or need programming.

However if you can guide me to solving this I appreciate in advance.
Mileage show and radio still plays.
The ECU flash is corrupt, the data doesn't make sense in there

[filutek]

Send here the original readings from both ECMs without changing to immo off.

[Qenzo]

I will tomorrow, though they are the ones I say are corrupted,
Thanks for your patience

[Qenzo]

Send here the original readings from both ECMs without changing to immo off.
Hello Filutek
I wasn't able to get the corrupt flash data and the original read of donor ECM, the guy who helped me read lost them.

At the moment I have a virgin file for the flash, was hoping to write it in the donor ECM and take it from there, though am not sure what the process will be. Please advise of the process to take with the virgin file.

Alternatively I just got KTAG so I thought cloning the original ECM but since the flash is dead, I will only write processor data.