HELP HONDA 77960-TMO-Z420-M3

[maruti]

hello
i have honda city 2013 , with 77960-TMO-Z420-M3 eeprom 93c86
with orignla data car have 3 error

92-20 = open or short to ground in the passenger airbag cutoff indicator
68-20 = short in the passenger front airbag off switch
76-61 = no signal from the pretensioner unit

but car have no passenger airbag switch
so may some have chnage airbag data or module
so i buy in market with just similar part number - 77960-TF0-Z420-M3 eeprom 93c86
with this i have 2 error

21-20 = increased resistance in the driver seat belt tensioner
41-11 = no signla from the left front impact sensor
after check seat belt tensioner now 21-20 error cleared
now 41-11 still error
i check all inn car change left right sensor , wiring connectivity from both sensor to module all are ok

so in my mind epprom data problem if some one help

thanks

[fuzz1]

Start by finding the correct airbag module number for the car for the country it was destined to.

[maruti]

hello
thanks for reply
77960-TM0-Z420-M3
may this one orignal

thankks

[maruti]

hello
only one error
41-11 = no signal from the left front impact sensor

thanks

[maruti]

hello
job done with this data
thanks for help

thanks