XPROG-M FULL

[energija]

Hello there !!!

I need a help about xprog-m.
if anybody have xprog-m whit full authorizatons plz i need flash and eeprom conent from atmega 64,
couse i try to update my xprog - m and lost all my authorizations .
So anybody can halp me .:wink:

[obdmaster]

Hello there !!!

I need a help about xprog-m.
if anybody have xprog-m whit full authorizatons plz i need flash and eeprom conent from atmega 64,
couse i try to update my xprog - m and lost all my authorizations .
So anybody can halp me .:wink:


So you downloaded lastest software 2010.02.12, and it wiped all your authorisations?

[energija]

yes couse it is a clone xprog-m.

[obdmaster]

yes couse it is a clone xprog-m.



Is it one of the $200 or $1,400 ones m8?

[energija]

the $ 200 , it is 4,5 full version with all authorizations .

[obdmaster]

Why not try emailing supplier and see if they have a dump they can send you m8. Worth a try nothing to lose. I wont bother trying to update mine then.

[energija]

i just do that and contac my supplier but he have a holiday's in china , so do u have xprog-m full to send me a conent from flash and atmega ?

[obdmaster]

i just do that and contac my supplier but he have a holiday's in china , so do u have xprog-m full to send me a conent from flash and atmega ?


My clone doesnt have full authorisations m8, and i have no other programmer to read with if its in pieces m8 sorry. Thanks for saying not to update though, very sorry for you about whats happened why not order another one and copy chips then sell one?

[energija]

oke thank u for ur reply's
i think will do that , order a new one and fix my older .

[arvind]

My clone doesnt have full authorisations m8, and i have no other programmer to read with if its in pieces m8 sorry. Thanks for saying not to update though, very sorry for you about whats happened why not order another one and copy chips then sell one?

friend just for my own knowledge..is xprog like beeprog and seeprog--

[cammy25]

I have a hunch you will not get the ATmega dump.

1. most chinese sellers are just RESELLERS.
2. They paid 4000 USD for extraxting dump. And if they make public other manifacturers can clone just like that.

Best is buy new one.

[branco]

Why not try emailing supplier and see if they have a dump they can send you m8. Worth a try nothing to lose. I wont bother trying to update mine then.


maybe chip protected
you can't clone it with new one
just a thought
wbr

[u.s]

so where can you buy em for $200 ?

[z786]

so where can you buy em for $200 ?

China ECU Tools Centre (http://www.ecutool.com/productshow.asp?id=1923&sortsid=3515&sorts)=

[u.s]

Thanks, does that come with the adaptors and full authorizations?

[branco]

Thanks, does that come with the adaptors and full authorizations?


not full
micronas missing
wbr

[PROCESSOR]

Hi,
you need to contact your supplier , he will send you news programmed atmega64 , i have a same problem and i change the ATMEGA 64 and i solve the problem , if you suplier don't accept to help you , please contact me i will help you to solve the problem.

[energija]

processor can u send me atmega64 to try to solve the problem

[another_seller]

processor can u send me atmega64 to try to solve the problem
hi m8, deem I can support on your case.

[PROCESSOR]

hI ,
yes i can do that.

[PROCESSOR]

Hi,
you need to change the Atmega , you can found who can sell you Atmega programmed and protected.
Best Regards.

[msh_msh]

HI
CAN X PROG M READ ST10F273 VIA ST10275

[another_seller]

Hello there !!!

I need a help about xprog-m.
if anybody have xprog-m whit full authorizatons plz i need flash and eeprom conent from atmega 64,
couse i try to update my xprog - m and lost all my authorizations .
So anybody can halp me .:wink:
hi, m8, my experience, if your atmega 64 is not secured just use lt48 uxp or beeprog is OK, xprog-m can't work with secured atmega 64

[another_seller]

HI
CAN X PROG M READ ST10F273 VIA ST10275
M8, It works with ST10275 144-pin PQFP, not tested on ST10F273

[albertros]

HI,
I updated mine before I used it. The obdfactory sent me a replacement ATMEGA64 and it worked.

[elektro128]

question.
after the change atmega 64 (full Authorizations).
your XPROG work on the latest version software?
v45 ( build 2010.02.12)

http://www.tmt.lt/Files/DPD_V45setup.exe

[etronic2]

question.
after the change atmega 64 (full Authorizations).
your XPROG work on the latest version software?
v45 ( build 2010.02.12)

http://www.tmt.lt/Files/DPD_V45setup.exe


I wouldn't think so....

Just bought cloned 4.5 with full authorizations and when installed the latest soft from TMT it asked me to update it...
To stay on the safe side I've uninstalled it and installed soft from my supplier. Works fine so far.....

[elektro128]

hi
needed instal XPROG-M V45
version
build 2009.08.18
or
build 2009.08.31

send please

[florinyes]

I wouldn't think so....

Just bought cloned 4.5 with full authorizations and when installed the latest soft from TMT it asked me to update it...
To stay on the safe side I've uninstalled it and installed soft from my supplier. Works fine so far.....


Hello mate

Is this one? China ECU Tools Centre (http://www.ecutool.com/productshow.asp?id=2057&sortsid=3515&sorts=Chip%20Programmer)

Does it really have authorisations for secured motorola?

Cheers

[etronic2]

Hello mate

Is this one? China ECU Tools Centre (http://www.ecutool.com/productshow.asp?id=2057&sortsid=3515&sorts=Chip%20Programmer)

Does it really have authorisations for secured motorola?

Cheers


That's the one...

Just got a problem with it: It works with HC05 and HC912 but i can't read HC08AZ60 from immo box from MB.

I'll try it with ETL what will confirm whether it works or not. It might be MCU dead as it is 2J74Y...

[florinyes]

That's the one...

Just got a problem with it: It works with HC05 and HC912 but i can't read HC08AZ60 from im*o box from MB.

I'll try it with ETL what will confirm whether it works or not. It might be MCU dead as it is 2J74Y...



Please let us know.

Ta

[almlohe]

hi
i sell xprog m but it is not work have in inside serial eprom (93c46) any one have file for it
plzz help
thanks
omar almlohe

[Carsmi1985]

Why not try emailing supplier and see if they have a dump they can send you m8. Worth a try nothing to lose. I wont bother trying to update mine then.

[iwan_s]

That's the one...

Just got a problem with it: It works with HC05 and HC912 but i can't read HC08AZ60 from im*o box from MB.

I'll try it with ETL what will confirm whether it works or not. It might be MCU dead as it is 2J74Y...
x-prog m dont work with HC08 with security

[pablo276]

hi
needed instal XPROG-M V45
version
build 2009.08.18
or
build 2009.08.31

send please

anybody have it? i'm looking for it too

[albertros]

Try this.
Post resultshttp:

Download xpg.rar for free on uploading.com (http://uploading.com/files/533e7ed9/xpg.rar/)

If the oe site locks your firmware you have to change the atmeg64 chip

[gobe]

I had a problem updating the china clone, and I need a new dump atmega64

Hi,
you need to contact your supplier , he will send you news programmed atmega64 , i have a same problem and i change the ATMEGA 64 and i solve the problem , if you suplier don't accept to help you , please contact me i will help you to solve the problem.

[gobe]

Hi

friend please help me
need dump for atmega64
I upgrade frimware and programmer no work
need any solution

thanks Gobe



Hi,
you need to contact your supplier , he will send you news programmed atmega64 , i have a same problem and i change the ATMEGA 64 and i solve the problem , if you suplier don't accept to help you , please contact me i will help you to solve the problem.

[stevan]

x-prog m dont work with HC08 with security

Xprog work with 908 with SEC. but like UPA usb you need to enter sec bytes.

[stevan]

908 picture

[mecale]

I need a help about xprog-m.
if anybody have xprog-m whit full authorizatons plz i need flash and eeprom conent from atmega 64,
couse i try to update my xprog - m and lost all my authorizations .

[mecale]

I need a support about xprog-m.
Becouse i try to update my xprog - m and lost all my authorizations .

[bram380]

Send back this xprog to dealer or replace atmega64 inside xprog-m.

[Master01]

đđĐđß$đĐßđßđßđđääđłldkf>>;*;ßßߤߤ;>>;>ßߤ]$ß$÷÷×ßß]¤¤¤]ß$$[ß[¤ĐĐß[ß...

[mecale]

Send back this xprog to dealer or replace atmega64 inside xprog-m.


I bought a very dishonest company.
Is trying to sell me again!:deal:
:beheaded:"uautotest"

[mecale]

I need dump for atmega64

[tishri]

need to download the files.. please allow me.. thanks

[zeca]

Hi
Where can I purchase a manual step by step type (ABC) this programmer
Thanks

[mexanico1971]

can you be more specific :beer:

[zeca]

hi
how to get started for example in air bags is necessary to read off crash which procedure? X prog m and I am layman in this matter
Thank you

[canorivera]

hi
how to get started for example in air bags is necessary to read off crash which procedure? X prog m and I am layman in this matter
Thank you

I want a book like this too, please does somebody have??

[cklair]

i have one for anther arlab programer it might help to understand resetting airbag modual ,i cannot upload picture just plane text file,

[jmb786]

that was really good

[jmb786]

superb stuff