nokia dbox pacino3 image

[namatse]

Given this dbox have put the pacino image on and added my location - all went well but no channels. When I do a channel scan I get "waiting for time" - any ideas as to what I am doing wrong? If this is related to time i have noticed that the actual time and date on the dbox are incorrect but I cannot see how this can be changed.
Enjoying this challenge but need some help from those in the know.
Help please or point me in the right direction - much appreciated

[MetMan]

Given this dbox have put the pacino image on and added my location - all went well but no channels. When I do a channel scan I get "waiting for time" - any ideas as to what I am doing wrong? If this is related to time i have noticed that the actual time and date on the dbox are incorrect but I cannot see how this can be changed.
Enjoying this challenge but need some help from those in the know.
Help please or point me in the right direction - much appreciated

flash a later img plenty in downloads

[moin]

flash the lhc2 image it great easy to use

[Elric]

make sure you get the latest image and also the right one
for the box,if its a nokia it will be a 2x image,if its sagem it
could be 1x or 2x image

[namatse]

Thanks for the help and advise. I will download the LHC2 image and let you know how it goes. Cheers

[namatse]

have tried both the LHC2 image and the lakys-sylas but neither has worked. Must be missing something simple I think?
On both occasions I have updated my location and done channel scans but keep getting the same messages "waiting for time" and error no channels
Any help would be appreciated

[scubar]

are you sure the cable feed is live?

[mickydibble]

Have you got a deffinate live feed?cable

[alom5]

Sorry to say, but it could be your area has gone to nag 3 and you wont be getting anything except fta channels...........like me.:sheep:

[namatse]

thanks scubar and mickydibble but yes the feed is live.
alom5 not sure what nag3 is all about?

[namatse]

oh dear - have just done some reading about nag3.... doesn't sound good but that can't be the reason for my probelms as other local dbox users not reporting any problems

[Ianleo]

Hi mate waiting for time is usually done to the tuner put an rf cable from the tuner out to the tv and see if you can tune a channel that way to test the tuner

[namatse]

have checked cabling is good -
can you let me know which is a good image to put on this nokia dbox. I think I need to read through more of the guides on this site to understand more about the process but having a correct image would be good start.
I am in teesside so will also need to source services.xml for my area.

[mickydibble]

get the latest commando image 11.3/12 flash this..... then you need the correct files ie magic files and ftp these to the same named folders on box chmod the cams in var/emu save and then on box set location and scan....

but you should get fta channels before moving on,after img is installed if you have a live feed from vm then you should get fta channels if not it is a sygnal prob like already mentioned micky

[namatse]

don't quite know what I was doing wrong before but that doesn't matter now - followed your suggestion and instructions and dbox up and running. thanks for advice, and the knowledge. Great site, great help cheers

[mazzer110]

get the latest commando image 11.3/12 flash this..... then you need the correct files ie magic files and ftp these to the same named folders on box chmod the cams in var/emu save and then on box set location and scan....

but you should get fta channels before moving on,after img is installed if you have a live feed from vm then you should get fta channels if not it is a sygnal prob like already mentioned micky

Thanks for this. Exactly what I needed. It works now.

[bob114]

hi
from post 15
don't quite know what I was doing wrong before but that doesn't matter now - followed your suggestion and instructions and dbox up and running. thanks for advice, and the knowledge. Great site, great help cheers

now back up your working image and save to pc

[mickydibble]

No problem. Hit the thnx. Button :)