CR16 adapter for upa usb

[drivergabriel]

Anyone have build an CR16 adapter for upa usba? I refer to something pro... beacouse today i f@@@ one pin of microcontroler!

[Meat-Head]

Anyone have build an CR16 adapter for upa usba? I refer to something pro... beacouse today i f@@@ one pin of microcontroler!

knew there was a reason for not touching them, thanks

[yasser]

CR16MCS CR16MHS (QFP80):
TxD:30 - Prog. RxD
RxD:31 - Prog. TxD
RST:54 - Prog. RST
ENV0:13 - Logic 0
ENV1:37 - Logic 1(optional)
GND:51 - GND
Vcc:50


I hope this is what you looking for.

Regards

[drivergabriel]

i already know that, thank you, but i refer to something like a pcb or a tool like bdm bench.....

[Romanky]

CR16MCS CR16MHS (QFP80):
TxD:30 - Prog. RxD
RxD:31 - Prog. TxD
RST:54 - Prog. RST
ENV0:13 - Logic 0
ENV1:37 - Logic 1(optional)
GND:51 - GND
Vcc:50


CR16MCS CR16MFS5 (QFP44): ?

[Claudiu_dar]

I tried going well with upa

[Romanky]

I got involved in figure pin 44th But I can not read it!

Any idea? What else to try!

Or am I doing something wrong!

[Zmann]

i already know that, thank you, but i refer to something like a pcb or a tool like bdm bench.....
Never touch CR16MCS and unfortunately the available datasheet lacks the package info. I think there are more than one type of QFP80 package but if the CR16MCS has pitch size of 0.8mm as the same as of M58BW016 Flash, I use the PCB in the photo.

[Romanky]

"CR16MFS5.rar" (1.27 MB) - st?hnout soubor (http://www.edisk.cz/stahni/77700/CR16MFS5.rar_1.27MB.html)

Audi 4 Airbag - 8D0 959 655 J - (Bosch 0 285 001 276

- DTC65535

[tachonow]

Chineese crash tool work via k-line.

[skens]

hi
x-prog via k line!
VAG (Audi , VW) supported airbag sensor types:
? 4B0 959 655A
? 4B0 959 655P
? 4B0 959 655Q
? 4Z0 959 655M
? 8E0 959 655A
? 8E0 959 655B
? 8E0 959 655C
? 8E0 959 655G
? 8E0 959 655K
? 8E0 959 655J
? 8H0 959 655B
? 8P0 959 655D
CR16 pin 13 and short it to GND.
65 +12
66 gnd
67 k-line only 80 pin cr16
regards

[einet]

Hello,
Can any explane how with the xprog can read the airbag over K line?

[florinyes]

I'll second what Tachonow said..works ok with this tool:Crash Eraser,Crash Eraser (http://www.carsung.net/EN/ProShow.asp?ProID=714)

Hope it helps!

[znoki]

Did somebody try to read this NSC CR16HCS9 processor by Omega MTRK? I can choose only CR16MCS or CR16MHS.
Thanks in advance!

[znoki]

Tested, working well with V1.32 (read-write OK)

[fontecno]

CR16MCS CR16MHS (QFP80):
TxD:30 - Prog. RxD
RxD:31 - Prog. TxD
RST:54 - Prog. RST
ENV0:13 - Logic 0
ENV1:37 - Logic 1(optional)
GND:51 - GND
Vcc:50


I hope this is what you looking for.

Regards
CR16MCS CR16MHS (QFP80):
TxD:30 - Prog. RxD
RxD:31 - Prog. TxD
RST:54 - Prog. RST
ENV0:13 - Logic 0
ENV1:37 - Logic 1(optional)
GND:51 - GND
Vcc:50


let someone help me out , i have orange 5 box and i will like to kn where to connect pin 0f ENV0:13 - Logic 0 and ENV0:37 - Logic 1 on the box 885707