VIRGIN FILE FOR CHEVROLET CRUZE

[Qenzo]

Hello DK Members

I have a Chevrolet Cruze, 1.8, 2010 year model, Manual Transmission.
ECU is bad and flash memory AM29F800BB is corrupt.

Further Details are:
25181280 AAG5
5WY1J12A
76.1

I got the donor ECU with similar numbers and now I need the virgin file for it

Alternatively, one member here posted a virgin file which he confirmed it works for a Chevrolet Cruze, 1.8
with the following details:
25186182 AA37
5WY1J19B
76.1

Can I use the same file, will it work on my donor ECU?

Thanks in advance

[crisvermex]

Yes works OK

[Qenzo]

Alright
Thanks a lot Crisvermex.
So to get the car started do I have to replace ecm programatically online(I think SPS /techline connect doesn't work in my country) or I can program it offline or with a manual procedure.

[Panathaole]

Alright
Thanks a lot Crisvermex.
So to get the car started do I have to replace ecm programatically online(I think SPS /techline connect doesn't work in my country) or I can program it offline or with a manual procedure.


for opel before 2012 you can make it offline, probably and in your case it should work....

[ElectroRadar]

Good morning friend here what you need to do is put your computer that you bought and use the op-com to change the serial number (VIN) and it will be ready to turn on, now many times it asks you to reprogram keys that would be the simplest thing since If you are using a computer with the same calibration number, it will be enough for you to carry out the steps that I indicate now. If you have a flash memory programmer, you can also edit the serial number of your vehicle (VIN) and only program keys. Greetings and I hope it works for you. this comment