Bricked EDC16C31 BMW E46

[MaRtuRik]

Hello.

Bricked BMW E46 EDC16C31 ecu, when programming with MPPS V16.

HW: 0281010565

SW:1037361830

Any solutions to restore them? MPPS bench mode?

I have original .bin file from this ecu, made by MPPS

[kiszka]

Hello.

Bricked BMW E46 EDC16C31 ecu, when programming with MPPS V16.

Any solutions to restore them? MPPS bench mode?

I have original .bin file from this ecu, made by MPPS

share this file to see what you have

[MaRtuRik]

Original bin file from this ecu.

HW: 0281010565

SW:1037361830

[kiszka]

Original bin file from this ecu.

HW: 0281010565

SW:1037361830

the folder is empty

[MaRtuRik]

Sorry, add a new one.

[kiszka]

Original bin file from this ecu.

HW: 0281010565

SW:1037361830

read flash is not complete
if this is the original reading then try direct saving to ecu from mpps

[MaRtuRik]

OBD won't comunicate with ecu.

Waking ECU pease wait....
ECU not found.

[raceshadow]

OBD won't comunicate with ecu.

Waking ECU pease wait....
ECU not found.

Do you have Ktag or something with BDM?

[kiszka]

OBD won't comunicate with ecu.

Waking ECU pease wait....
ECU not found.

only the BDM connector remains

[d3lete]

Try to recover with Winkpf over Kwp protocol. Check the stat percent when it goes 100% and a temp gauge come back to normal, terminate the process.

[kiszka]

Try to recover with Winkpf over Kwp protocol. Check the stat percent when it goes 100% and a temp gauge come back to normal, terminate the process.

you will not get connection to ecu

[d3lete]

you will not get connection to ecu

Some cases when stuck in boot clone mpps not connect it. But winkpf will. He talk about MPPS. I think.

[kiszka]

Some cases when stuck in boot clone mpps not connect it. But winkpf will. He talk about MPPS. I think.

If so, trying not, the shotgun won't shoot, it doesn't hurt to try