BMW 525XD EDC17CP45 Stage 1

[costyrzv]

Hello, so UI started tuning EDC17 and I got this BMW 525xd and I managed to find a few maps but still missing some of them , so I found the following :
- Driver's Wish 2 times 8x14
- Rail pressure requested 6 times 16x16 (I think)
- Rail pressure limiter 2 times 16x16 (not sure)
- boost requested 16x16 (2 times ) and 12x10 (not sure about this 12x10 map) - my question here is since the car has 2 turbos does it have individual maps ? since the requested pressure from what I found are different peaks (maybe there is just a map that lowers the pressure depending on engine temp or something)

Now if someone wants to help me identify the maps or can give me a mappack for learning reasons . A stage 1 already would come in handy so I can see the modifications made to rail,driver's wish , torque limiter etc.

Thank you !

[eggystar]

So you will pay for the one who will spend time to create a mappack for you ?

[gadelhas]

36a728-SVTL 1X1

36B080- TQ 15X1

36B272-TQ 22X1

3BCB22-TQ 22X2

34CBC4 DW 8X14 ( YOU HAVE PARALELE NEXT THIS ONE)

39C9740- SVGL 1X1

3C97A6-GL 4X1

3885E2- DURATION 40X18

3AF882- TORQUE TO FUEL 20X20

3B662A-RAIL 17X19

3C3A3E-LAMBDA 16X16

372EC6-SOI 16X16

its too many maps you have i few here

[costyrzv]

So you will pay for the one who will spend time to create a mappack for you ?

I did not come begging for a free file o a free mappack , I told you what I found already and if someone can make my job easier and give me a mappack since it's the first time I'm seeing this ecu . I've done VAG edc15.16.17 ME7.x but I did not mess with bmw's previous edc's and there is like very little info out there, with the info I found I did find some maps . So only for learning pourposes I asked for a mappack and a stage 1 !

[costyrzv]

36a728-SVTL 1X1

36B080- TQ 15X1

36B272-TQ 22X1

3BCB22-TQ 22X2

34CBC4 DW 8X14 ( YOU HAVE PARALELE NEXT THIS ONE)

39C9740- SVGL 1X1

3C97A6-GL 4X1

3885E2- DURATION 40X18

3AF882- TORQUE TO FUEL 20X20

3B662A-RAIL 17X19

3C3A3E-LAMBDA 16X16

372EC6-SOI 16X16

its too many maps you have i few here

Thank you very much gadelhas for actually coming in with something helpful ! I am still trying to understand the values tho, they look strange especially the TQ LIM .

So I only need these ones to do a stage 1 ? From what I understand lambda map reapleaced the smoke map ?

Thanks again !

[costyrzv]

This does not look right , doesn't it ? Maybe someone can give me a tip

873825

[gadelhas]

The values is in NM not in MG like some edc16 and edc15 and the lambda maps is smoke limiter highers values=less fuel lower values=more fuel

you will need modified more maps like:
-Torque Monitoring
-EGT´s TEMP

remember you not just have 1 map of single limiter you can find 3 or 4 with differents valeus because water temps, oil temps.

[gadelhas]

reverse axes

[costyrzv]

nobody here can share mappack ?

[costyrzv]

So I found the following maps for now , if someone can give me a hint for the next maps and explaing one map I have on there that I do not know what it is . I found like 20 lambda maps, I don't know wich ones to modifiy and wich ones to not touch , What do I have to modify for stage 1 ? DW , TQLIM(wich of those 4?), LAmbda, Duration , Rail and wich are boost maps and if I have to touch those for a stage 1.

I will attach ori file and kp made by me.. Thanks all for help

I will make the kp file and will send to everyone willing to help .