BigJ
11th March, 2022, 02:00 AM
Hi all.
Please need a virgin dump for the following ECU:
A 031 545 18 32
HW 38.01
0 261 207 572
ME2.8.1
EEPROM: 5P08C3
W203 C32 AMG
Here's why:
-Made a new key with MB Tool, which worked on the bench with the EIS, but wouldn't allow the car to start once all back in place in the car. (Figured out the EIS had become corrupted.)
-Got a used (same part number) EIS with a working key.
-Turfed out the ESL (3 pin type) and installed an emulator.
874168
-Green LED in emulator illuminates when key is inserted into EIS, Red LED when key is
removed, showing the emulator is doing its job.
-Virginised the ECU with a dump from DK (Credit & Thanks to @Mercis).
https://www.digital-kaos.co.uk/forums/showthread.php/625607-Immo-off-or-virgin-MB-C32-AMG-0261207572-ME2-8?highlight=w203+c32+me2.8.1
-Live data in ECU shows Not Personalised and Not Activated, so it wont crank with key and wont fire up if cranked directly on the starter relay.
-Use Star Diag to Adapt virginised ECU with DAS.
- The process begins, asks for new VIN , which the ECU accepts and saves (I assume it accepted and saved it because the new VIN is not asked for again in in any more future tries.)
- The fuel pump starts to run continously.
- After a few "Turn key on/ off" requests from DAS, I get a "Start the Engine" Message.
- DAS gives a personalisation error.
- And thats the end. It doesn't crank.
- If I do it again, exactly the same as above happens, except it no longer asks for the VIN.
Any advice please? Am I doing it correctly? I suspect it maybe a "faulty" or incorrect virgin dump. (I found a post somewhere with someone with same problem, speaking of the dump. Cant find it again).
Any help would be much appreciated.
Regards
J:uncomfortableness:
Please need a virgin dump for the following ECU:
A 031 545 18 32
HW 38.01
0 261 207 572
ME2.8.1
EEPROM: 5P08C3
W203 C32 AMG
Here's why:
-Made a new key with MB Tool, which worked on the bench with the EIS, but wouldn't allow the car to start once all back in place in the car. (Figured out the EIS had become corrupted.)
-Got a used (same part number) EIS with a working key.
-Turfed out the ESL (3 pin type) and installed an emulator.
874168
-Green LED in emulator illuminates when key is inserted into EIS, Red LED when key is
removed, showing the emulator is doing its job.
-Virginised the ECU with a dump from DK (Credit & Thanks to @Mercis).
https://www.digital-kaos.co.uk/forums/showthread.php/625607-Immo-off-or-virgin-MB-C32-AMG-0261207572-ME2-8?highlight=w203+c32+me2.8.1
-Live data in ECU shows Not Personalised and Not Activated, so it wont crank with key and wont fire up if cranked directly on the starter relay.
-Use Star Diag to Adapt virginised ECU with DAS.
- The process begins, asks for new VIN , which the ECU accepts and saves (I assume it accepted and saved it because the new VIN is not asked for again in in any more future tries.)
- The fuel pump starts to run continously.
- After a few "Turn key on/ off" requests from DAS, I get a "Start the Engine" Message.
- DAS gives a personalisation error.
- And thats the end. It doesn't crank.
- If I do it again, exactly the same as above happens, except it no longer asks for the VIN.
Any advice please? Am I doing it correctly? I suspect it maybe a "faulty" or incorrect virgin dump. (I found a post somewhere with someone with same problem, speaking of the dump. Cant find it again).
Any help would be much appreciated.
Regards
J:uncomfortableness: