View Full Version : help with bosch m3.8.3 anc Cruise
DjDecibel
14th March, 2022, 06:17 PM
hello, i have a 1999 1.8T AGU Golf with factory fitted Cruise control.
the original ecu is damaged and it was a 06A906018 BB so i bought a 06A906018 R,
i did immo off reading and editing the B58258 dump, the car works but i don't have the cruise feature anymore and i cant set the throttle in vcds, it gives me error
how can i enable it? and which solution can i use for reading the ecu? galletto? kess?
i read somewere that's not easy to read and write this kind of ecu
alonedark
15th March, 2022, 01:17 PM
if easy put original files and change A0 by 50 in eprom dump,if better for help you put ecun number , years ........
and when you learn everything from these ecus that you are going to do with electric cars
alonedark
15th March, 2022, 01:19 PM
if you want the mod file upload ori and mod i do it for you
alonedark
15th March, 2022, 01:21 PM
dont forget check sum in eprom file
DjDecibel
15th March, 2022, 07:09 PM
if you want the mod file upload ori and mod i do it for you
which tool will work with this kind of ecu?
can i read it thru obd port?
Baddog84
15th March, 2022, 07:24 PM
which tool will work with this kind of ecu?
can i read it thru obd port?
eprom programmer need
DjDecibel
14th September, 2022, 12:30 AM
if easy put original files and change A0 by 50 in eprom dump,if better for help you put ecun number , years ........
and when you learn everything from these ecus that you are going to do with electric cars
Sorry for the late reply but my programmer was broken, so finally i got the new one!
the codes on ecu are:
06A906018 R
Benzin D06
bosch 0261204673
01.03.99 26SA5648
and the attached file is the ecu dump
it should be SW 358109
can you mod it reenabling the cruise? or i should re-flash it with a BB version?
Pacsat
14th September, 2022, 11:08 AM
Sorry for the late reply but my programmer was broken, so finally i got the new one!
the codes on ecu are:
06A906018 R
Benzin D06
bosch 0261204673
01.03.99 26SA5648
and the attached file is the ecu dump
it should be SW 358109
can you mod it reenabling the cruise? or i should re-flash it with a BB version?
You can reflash it, but eep too!
Regards
DjDecibel
14th September, 2022, 02:57 PM
You can reflash it, but eep too!
Regards
so i should reflash both eeprom and flash? i don't have both, i just found a ori BB flash file on another thread
and i don't have the damaged ecu anymore
Pacsat
15th September, 2022, 12:13 PM
Try this eeprom
alonedark
15th September, 2022, 04:10 PM
if easy put original files and change A0 by 50 in eprom dump,if better for help you put ecun number , years ........
and when you learn everything from these ecus that you are going to do with electric cars
you have here put inmo off in your original file
DjDecibel
15th September, 2022, 04:34 PM
ok, i flashed the BB files in eeprom and rom but now the car don't start and i have this error in vcds:
01314 - Engine Control Modole
37-00 Faulty
i flashed back the R files and the car start again and no error in the ecu.. so i think that r and bb are different
Pacsat
15th September, 2022, 07:10 PM
For sure BB and R are different :courage:
I think you have a checksum problem...
Try this eeprom.
But you must match immo.
DjDecibel
23rd September, 2022, 12:18 AM
For sure BB and R are different :courage:
I think you have a checksum problem...
Try this eeprom.
But you must match immo.
i checked the bb ori i found with winols, and they looks broken or with checksum problems
do you also have the flash ori that matches the eeprom you posted?
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.