PDA

View Full Version : IMMO off FIAT SCUDO 1998



pokusmaster
15th March, 2022, 09:11 PM
875112Dobrý den, máte někdo řešení pro Fiat Scudo ECU BOSCH 0 281
001 442 AS3.1

rafal
16th March, 2022, 10:00 AM
open ecu and make picture...............must be eeprom inside
what type of fule valve in pump?

pokusmaster
16th March, 2022, 02:54 PM
hello. thanks

foto ECU inside a eeprom , immo unit ignition coil ( probably have external next immo unit ).

pokusmaster
16th March, 2022, 03:00 PM
EEprom here.

rafal
16th March, 2022, 04:07 PM
and 2nd question?

pokusmaster
16th March, 2022, 04:40 PM
I dont know, car is not here.

rafal
16th March, 2022, 04:54 PM
I dont know, car is not here.

so that's your problem................

pokusmaster
16th March, 2022, 08:45 PM
so that's your problem................

yes, tomorow will know . thanks

pokusmaster
17th March, 2022, 08:37 PM
Hello. Find comfort module and eeprom 93lc66 , but cant generate key with my vvdi2, probably need tango.
existing any different solution for generate key ?

autel dont can this too.
maybe lonsdor or carprog ?

rafal
17th March, 2022, 10:20 PM
read 93c66/95040 for pin
ID: 33
Transponder Type: T5 or PCF7930/31
also you can use universal xhorse.....and add key

pokusmaster
18th March, 2022, 08:40 AM
Thanks, but dont have support this eeprom in my all tool.
support only 95040 - or 93LC66 is same as 95040 ?

I have VVDI2, AUTEL, Carprog.

Thanks.

rafal
18th March, 2022, 02:51 PM
Thanks, but dont have support this eeprom in my all tool.
support only 95040 - or 93LC66 is same as 95040 ?

I have VVDI2, AUTEL, Carprog.

Thanks.
answer : not

what eeprom have you got inside?
if 95040 - read as 95040
if 93c66 - read as 93c66
make picture from inside of immobox

pokusmaster
18th March, 2022, 08:03 PM
Hi 93LC66 micro.

rafal
18th March, 2022, 08:11 PM
Hi 93LC66 micro.

Ok. So try again read eeprom and desolder from board because your file looks no good

pokusmaster
19th March, 2022, 11:05 AM
Hi, when read unsolder, as Microchip or ST, is different . And solder or unsolder too different .

Thanks

I know TM pro can make tranponder from this eepom, but dont have this, and for one job is much money, car is werry old and coustomer pay only to any limit .

rafal
19th March, 2022, 11:11 AM
Pin Code - 50C6
transporder is cost like nothing............just add key by obd tool