JTAG and DM500S

[Kelly_DK]

Hi
Have read a lot of posts about Jtag and dreambox in here - great help!

I have used the windows program and after a few try I got connection to the box and was able to write a new boot to my DM500. When I used Dreamup to flash a new image to the box it says boxtype 56xx and not 500.
What to do now? Just continue and flash a new image or Jtag from beginning?


Kelly_DK

[jbvid]

Hi
Have read a lot of posts about Jtag and dreambox in here - great help!

I have used the windows program and after a few try I got connection to the box and was able to write a new boot to my DM500. When I used Dreamup to flash a new image to the box it says boxtype 56xx and not 500.
What to do now? Just continue and flash a new image or Jtag from beginning?


Kelly_DK
Hi
Just looks like you flashed the wrong bootloader file, was it from this site?
Try another from the D/L section and try another Dreamup from here or use the popular search engine.
jbvid

[Kelly_DK]

Yes it was a file from this site.

Where to find the right bootloader file?

Kelly_DK

[Kelly_DK]

Hmm I have read something about that I can just change the blimg file, that is in the folder for jtagwin5xxx...anyone who knows where to find the right blimg file for DM500 clone?

Thanks for all your help so far :)

[jbvid]

Hmm I have read something about that I can just change the blimg file, that is in the folder for jtagwin5xxx...anyone who knows where to find the right blimg file for DM500 clone?

Thanks for all your help so far :)
Hi
Depending on your Tuner you could change 2 of the four Alps or Phillips files to blimg in (boot.zip, boot(2).zip) and try them, unless anyone knows the secret of these illusive blimg files.
jbvid

[Kelly_DK]

ahh so the secret is just to rename the dm500-alps-boot.bin to blimg and use the windows program to transfer the bootloader to the box?

Kelly_DK

[jbvid]

ahh so the secret is just to rename the dm500-alps-boot.bin to blimg and use the windows program to transfer the bootloader to the box?

Kelly_DK

Hi
I found this in my collection, it mentions success with Alps tuner on a db500 in a readme file so is worth a try, as i'm not too sure about just renaming the Alps bin file to a blimg, so try this first unless you feel brave.
jbvid

[Kelly_DK]

Hi jbvid

This is the same folder/file that I have used for my DM500 clone.
Dreamup just shows that the model type is a DM56xx, so it seems that the blimg file is not the right one...

I was hoping that someone had the right blimg file for the program...

Maybe there is stille someone out there that knows how to solve this problem.

But thanks again for trying!

Kelly_DK

[jbvid]

Hi jbvid

This is the same folder/file that I have used for my DM500 clone.
Dreamup just shows that the model type is a DM56xx, so it seems that the blimg file is not the right one...

I was hoping that someone had the right blimg file for the program...

Maybe there is stille someone out there that knows how to solve this problem.

But thanks again for trying!

Kelly_DK
Hi
Try this one
jbvid

[micromouse]

22222222222222222222222222222222

[larolse]

I will try this also

[costas1974]

:help:I have the same problem . I made everything as the instructions but my dm500 says dm56xx instead and although the RS232 is working I think there is not much to do from there . I tried everything. :vollkommenauf:Do I have to jtag again? And has anyone found a blimg that works with dm500 clones? please help !!! It's the second dm500 that goes boommmm !!:dontknow:

[erdi01]

Hello!
I have a problem with a dreambox 500 clone that is not related to pc by
the jtag and test out a message I want to remind contection error that LAMPS displayt not the green light.

dreamboxi there any way that relates to the pc or dreamboxi has finally died.
Forgive me for my bad English

[domelek]

@Kelly_DK (http://www.digital-kaos.co.uk/forums/members/8920-kelly_dk/)

I have the same problem with my 500s did you finally found a solution?

[oksorin]

Sal.ma all overdrive for some time with .. dm500s fail to find file blimng correctly. We do jtag cable I followed the procedures described on several forums ... but normal flow procedure fail to bring to life. can not do something corect.folosesc jtag my dm500 and appears:
Flash info. : INTEL Unknown
[dm500] reading CA:ca 00 01 06 20 83 69 00 00 00 00 00 00 06 04 ff
[CA] 4th mac addr byte is not redunderant, fixing it
[CA] 5th mac addr byte is not redunderant, fixing it
[CA] 6th mac addr byte is not redunderant, fixing it
Readed Config Area
Configuration Area
Mac Address: 00:00:00:20:83:69
Redunderant Mac Address: 20:83:69
Tuner Type alps
Mac Address Change Requested
INTEL flasul is TE28F640. Do not you proceed corrections? how to proceed? thank for help me.sorry English if I spell correctly

[sadaf2]

I have the same problem with my 500s did you finally found a solution?

[oksorin]

I have not found any solution. still looking

[hunter2000]

thank u for all

[bmohsen]

jtag failed so i unplugged the psu then my box is dead no green light

[silvarodrigues]

hi ppl.

some one can help me with this:

i get the same error whem i open jtag-windws.exe,
with the lpt1 connect and without connect ...
-could not determinate paralel por on your pc-

this hapend because:
windows version
cable
etc

?????????????

thanks ppl
apreciate some help

Mr.G
abarisgmail@yahoo.com

[Vaako]

I need the JTAG pinout for the DM500S does anyone can help me with that?

Thanks in advance!!!

[zalimfirari]

Sal.ma all overdrive for some time with .. dm500s fail to find file blimng correctly. We do jtag cable I followed the procedures described on several forums ... but normal flow procedure fail to bring to life. can not do something corect.folosesc jtag my dm500 and appears:
Flash info. : INTEL Unknown
[dm500] reading CA:ca 00 01 06 20 83 69 00 00 00 00 00 00 06 04 ff
[CA] 4th mac addr byte is not redunderant, fixing it
[CA] 5th mac addr byte is not redunderant, fixing it
[CA] 6th mac addr byte is not redunderant, fixing it
Readed Config Area
Configuration Area
Mac Address: 00:00:00:20:83:69
Redunderant Mac Address: 20:83:69
Tuner Type alps
Mac Address Change Requested
INTEL flasul is TE28F640. Do not you proceed corrections? how to proceed? thank for help me.sorry English if I spell correctly
merci merci

[wat3rb0y]

i haven't get a solution yet :(

[yktora]

VERY USEFULL POST BUT I CANT FIND JTAG PROGRAM:giveup::bike:

[trofasat]

i couln?t make my dream jtag.

[trofasat]

my dream 500s don?t accept jtag

[jorge07]

Do not give up, it's all in the forum and download section.

[poohkwangz]

pls. help me, newbie here, sorry... what is "Intel Unknown" during a jtag using DOS...? It only end up in "Flash Erase Done"? what I need to do??

[kalauz]

For me with a dm500s clone with TE28F640 jtag recovery with Dreamflash worked correctly.
There was only problem getting the box recognized by Dreamflash, I plug power cord and gave recognize command at the same time.

cheers

[hehopmajieh]

10x for help

[pleite418805]

For me with a dm500s clone with TE28F640 jtag recovery with Dreamflash worked correctly.
There was only problem getting the box recognized by Dreamflash, I plug power cord and gave recognize command at the same time.

cheers


You've fixed it?, You could boot to facilitate TE28F640.
thanks