View Full Version : YAMAHA MT 03, CONNECTION TO READ EPROM. PLEASE
marquicarpower
23rd March, 2022, 08:48 PM
good afternoon to all forum
I have a 2017 yamaha MT03, to reprogram the km.
Please, does anyone have the connections to read the 93c66 eprom without having to desolder the display? And if it is not too much to ask for the pin out to turn on the board with 12 v.
Thank you very much already
cgri02
23rd March, 2022, 08:58 PM
https://uploads.tapatalk-cdn.com/20220323/2c623ac9d6898738da7714aefb5b57db.jpg
https://uploads.tapatalk-cdn.com/20220323/a83faed0e90031ea671ee7368d157af3.jpg
Here….
It is not possible to connect without removing the screen.
Tapatalk kullanarak iPhone aracılığıyla gönderildi
marquicarpower
23rd March, 2022, 09:13 PM
CGRI02, DO YOU HAVE THE PIN OUT TO TURN IT ON? PLEASE.
frankrayk
23rd March, 2022, 09:20 PM
No e-mails m8 !!!
Sorry, it went unnoticed.
877132
Geryy
24th March, 2022, 11:19 AM
No pin eeprom on the other side
f2f2
24th March, 2022, 07:30 PM
No pin eeprom on the other side
This board eeprom readable with out solder.
Incircuit mode
Geryy
25th March, 2022, 12:17 AM
still need removing screen and needle
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.