TRW d219

[nezocas]

Hi,

Need help with this SRS unit:

1358991080
219953-102
D219

Eprom 25LC320

From 2010 Citroen Jumper 3.0, 146cv

I have got this errors inside SRS:

[dragon100]

Check this and report, if not ok, check elements on pcb, pass in pm.

[nezocas]

Check this and report, if not ok, check elements on pcb, pass in pm.

Your file maybe good.....But ligth didnt go OFF....Even tried to reset with Autel.
Will check the PCB.

Best regards

[dragon100]

I told you , check elements on pcb, if only internal error, my file should work ok, but if error with something wrong with voltage, it looks like some elemnts on pcb is wrong ...

[nezocas]

The errors are:
9008 Airbag detonator of driver level 1 open circuit
9001 Internal calculator not defined

I have removed the stearing and checked the continuity of the flat cables inside the round thing, from the entrance to the airbag and radio controlls.

[fuzz1]

9008 probably problem with the clockspring too
and 9001 maybe module not properly coded

of course not saying i'm excluding physical problems on the board

[nezocas]

9008 probably problem with the clockspring too
and 9001 maybe module not properly coded

of course not saying i'm excluding physical problems on the board

SOLVED

Called custumer to check the continuity from airbag to the SRS plug..... It would make my life easy to check the SRS pcb by only cheking the 2 traces of the airbag.
Custumer arrived, and said..... now I dont have horn any more..... hummmm
Removed clock spring again, opened it...... and it was broken...... I tested it in the beegining and it was NOT interrupted.
Cut the broken part, resolder again and it as been working since.
File from dragon 100 is 100% OK.

Best regards
Nezocas

[fuzz1]

Ok i was right for 9008 what about 9001