Fabia 2 1.4 TDI 80PS problem with reading soft ECU Kess and mpps

[atmpitbull]

HI i have Skoda Fabia 2 2008 year engine 1.4 TDI 80ps BMS. Problem is with kess (i have wake up error) and mpps (no access). Please help how reading this ecu from obd. I have mpps and kess clone. No problem with other ecu only this. Thanks. Sorry from my eng.

[xk1rk]

Hi, try remove dash fuse.

[atmpitbull]

Which fuse to remove the number?

[xk1rk]

I think it is number 22, 7,5A.

[atmpitbull]

When 22 i have no power in obd, meybe 3? 3 no change

877346

[Aladinnu]

just remove ecu from car and read it with kess adaptor . u need 12v source and use kline for read.

[atmpitbull]

I have EDC17U01 not 16U1. Same pin?

[marko6jpt]

EDC17U01 u probably will not be able to read it via obd with a clone.
only on bench

[Aladinnu]

if its BMS engine is always edc16. if u checked under the hood and its edc17u01, i did one with kess on obd no problem
edc17u01 was fitted only on 1.9 tdi not 1.4tdi.

[atmpitbull]

I have EDC17U01

877525

[Aladinnu]

don t count on what kess list say. its not always that ecu on car.....look under the hood.

[marko6jpt]

if its BMS engine is always edc16. if u checked under the hood and its edc17u01, i did one with kess on obd no problem
edc17u01 was fitted only on 1.9 tdi not 1.4tdi.


not really, i've an ibiza mk5 1.4 tdi pd80 BMS engine with edc17u01 ecu ;)

[automechanik]

Hi maybe help it someone else, fabia dont may be connected trough obd port in car because dont have on it connecting can bus port. Lets try dignose any ecu in this car, possible conecting is only through k-line, then that is reason what u must ecu r/w with any tool only on bench.

P