360 no video/sound but no rrod???

[ezzda1]

as the title says i have a 360 theres no video or audio, its not the av lead (i tried a brand spanker)
its firing up as normal, green lights n everything, trays ejecting etc, but nothings coming on the tv, (its not the tv either),
cant get any error codes cos it isnt recognising any errors,
how can I fix this? its an old first gen, silver tray bezel, non hdmi etc, its the first problem ever since new in 2006.
any help or info apreciated.
thanks in advance

[cgscott]

You tried flicking the swith on the lead from hd to tv?

What lead are you using?

Try getting a scart lead from a friend or order one. If that dont work its the output on the board thats gone.

[ezzda1]

its not the lead, it doesnt have a hd/tv switch on it, i've tried 2 different leads including a brand new 1 & the one it came with and both leads work on another box,
i was just wondering if a reflow might solve the problem, I cant see any burnt bits on the mobo, or any tin slivers etc, so i dont think anythings gone pop, but my reflow kit is on its way so i'll see what happens after a reflow.

[djjwdubz]

as the title says i have a 360 theres no video or audio, its not the av lead (i tried a brand spanker)
its firing up as normal, green lights n everything, trays ejecting etc, but nothings coming on the tv, (its not the tv either),
cant get any error codes cos it isnt recognising any errors,
how can I fix this? its an old first gen, silver tray bezel, non hdmi etc, its the first problem ever since new in 2006.
any help or info apreciated.
thanks in advance

what you do mate take it apart then pull the fan lead out. then turn it back on let it heat up untill it turns to two red lights.

then wait till it all cools down then turn it back on after like 10 min then it will come back on.

i had the same prob but now its fixed.


ps this will not last long you will need a heat gun to fix it forever and replace the x clamps with bolts and washers.

please let me no what happends it will work so try it you will be playing it 2night.

[ezzda1]

what you do mate take it apart then pull the fan lead out. then turn it back on let it heat up untill it turns to two red lights.

then wait till it all cools down then turn it back on after like 10 min then it will come back on.

i had the same prob but now its fixed.


ps this will not last long you will need a heat gun to fix it forever and replace the x clamps with bolts and washers.

please let me no what happends it will work so try it you will be playing it 2night.

i'm not after a quick fix that lasts 10 mins lol, if it needs reflowing thats not a problem, I just havent come across one with this problem, that hasn't red lighted, and since it hasn't red lighted i cant get an error code up, if it's just a cracked soder joint thats causing it I can reflow the whole board, I was just wondering if a reflow would fix it or if its a known problem that may need components replacing etc.

[cgscott]

Chances are it wont fix it.

I have known HDMI ports to stop working.

If you have a spare board and the reflow dont work might be worth trying a swap on the adapter at the back of the console.

[ezzda1]

Chances are it wont fix it.

I have known HDMI ports to stop working.

If you have a spare board and the reflow dont work might be worth trying a swap on the adapter at the back of the console.

its not got hdmi on it.
its an old xenon board, it only has the av port, i dont know if its that though, he said this morning the screen went green, and froze green whilst playing guitar hero, he switched it off left it for a few mins then when he put it back on it all lights up green like it should finds the controllers etc, the tray ejects, no red lights, and no video or audio, to me it sounds like the ana chips blown but that should red light and give an error code, wouldnt it? or its got a cold solder joint, I'll try a reflow first, cant realy break it any more lol. like i said i've never seen one die without the red lights,

[cgscott]

Never seen one die without rrod either. But the AV ports can go just the same and this does not cause RROD.

Maybe a reflow might help. I had one that broke up and pixelated then got rrod within couple minutes.

I reflowed and all is working fine now.

So you may be correct in saying cold solder break. Although it should show up rrod.

[djjwdubz]

i'm not after a quick fix that lasts 10 mins lol, if it needs reflowing thats not a problem, I just havent come across one with this problem, that hasn't red lighted, and since it hasn't red lighted i cant get an error code up, if it's just a cracked soder joint thats causing it I can reflow the whole board, I was just wondering if a reflow would fix it or if its a known problem that may need components replacing etc.

did i say it will fix for 10 min nah. give it a try to see if that's the prob then reflow you must swap the x clamps other wise it will keep messing up. the reflow will fix it. when the motherboard heats up when your playing it the board bends cuz the x clamps. if you don't do that then your ****ed an then u gotta buy a new one. do what ya want.

[djjwdubz]

i'm not after a quick fix that lasts 10 mins lol, if it needs reflowing thats not a problem, I just havent come across one with this problem, that hasn't red lighted, and since it hasn't red lighted i cant get an error code up, if it's just a cracked soder joint thats causing it I can reflow the whole board, I was just wondering if a reflow would fix it or if its a known problem that may need components replacing etc.

oh an by the way i fixed my mates xbox with just the motherboard an x clamp swap an now its been over 10min i fixed last week.lol

[ezzda1]

did i say it will fix for 10 min nah. give it a try to see if that's the prob then reflow you must swap the x clamps other wise it will keep messing up. the reflow will fix it. when the motherboard heats up when your playing it the board bends cuz the x clamps. if you don't do that then your ****ed an then u gotta buy a new one. do what ya want.

I know overheating it can possibly sort it out but, you are OVERHEATING it, this puts a lot of strain on other components on the board, (almost as bad as the towel trick) and it will go again if not the same day within a few months, also the reason the board warps, is because the middle lug on the chassi is about half a mm too tall, sand it down a bit and the board then sits flat,
yes the xclamps are crap, I will be replaceing them with bolts, I will also be using the uniclamp, to help keep it flat, I know how to fix rrod I've done it lots of times, my problem was it hasnt gone rrod, and i havent seen this problem before. and theres no point reflowing it if all it needs is a new av port.
but it is looking like it needs reflowing.

[djjwdubz]

I know overheating it can possibly sort it out but, you are OVERHEATING it, this puts a lot of strain on other components on the board, (almost as bad as the towel trick) and it will go again if not the same day within a few months, also the reason the board warps, is because the middle lug on the chassi is about half a mm too tall, sand it down a bit and the board then sits flat,
yes the xclamps are crap, I will be replaceing them with bolts, I will also be using the uniclamp, to help keep it flat, I know how to fix rrod I've done it lots of times, my problem was it hasnt gone rrod, and i havent seen this problem before. and theres no point reflowing it if all it needs is a new av port.
but it is looking like it needs reflowing.

i get ya i fixed the same thing its best to use a heat gun. i used the motherboard. but mine had e74 my dad fixed it with a heat gun an i have not had a prob since. its been over a month now but i will let everyone no when it goes again but my dad fix them all the time he knows its fixed forever.lol well i hope so

[cgscott]

Dubz im sure you told us you were 24 years old a while back.

You not capable of trying to fix these yourself?

Or was i right in saying you are a kid?

[saarundisc]

i have the same problem with a friends xbox i'm fixing for him turns out the dvd drive is knackered. it boots up perfectly when i disconnect it. it's an old dash so i'm gonna jtag it.

[johnboy1974]

following cg scotts advice has worked a treat for me, i got a cheapie heat gun and followed some guides on youtube its very easy to do.

[djjwdubz]

Dubz im sure you told us you were 24 years old a while back.

You not capable of trying to fix these yourself?

Or was i right in saying you are a kid?

nah mate I'm 24. the reason my dad fixed it is because he fixed his before. he has got all the stuff to fix anything. my dad done mine because i never wanted to buy the stuff just incase the xbox was not gonna work ever again.

i have other things to buy then a heat gun an paste why buy it if my dad has got it.

lol I'm 24 lol why don't u believe me i never lie here date of birth
08/10/85 i never lie!

[cgscott]

sorry my apologies although sometimes when you type something to reply to people it seems that you miss some punctuation marks etc and this can lead to people finding it very hard to read what you have typed that was another reason i had my suspicions that maybe you were a lot younger than you stated i assume you smoke weed as t2p has a similar problem with punctuation from time to time must be some chemical that damages the brain cells which store information on how to type in paragraphs etc

So please accept my apology :D

[davethedappa]

have you tryed to reset the display settings ?. remove any cds from the tray, remove hard drive if you have one, then turn on the xbox with the pad and as soon as the green light comes on your xbox press and hold the y button then press and hold the right trigger. keep the buttond held down for a bit and see if anything happens. i fixed a mates xbox for him by doing this. hope this helps.

[djjwdubz]

sorry my apologies although sometimes when you type something to reply to people it seems that you miss some punctuation marks etc and this can lead to people finding it very hard to read what you have typed that was another reason i had my suspicions that maybe you were a lot younger than you stated i assume you smoke weed as t2p has a similar problem with punctuation from time to time must be some chemical that damages the brain cells which store information on how to type in paragraphs etc

So please accept my apology :D

yo look I'm not gonna lie i had probz at school i never leaned **** all till i left. i never wanted to do nothing but no all has changed. i don't give a **** what anyone says at lest I'm still here with my beautiful daughter. who gives a **** about it no one if perfect. if you ask me I'm a better man then you. thanks for bringing it to my attention you dick. oh an yes i do smoke weed an i love it.

[djjwdubz]

sorry my apologies although sometimes when you type something to reply to people it seems that you miss some punctuation marks etc and this can lead to people finding it very hard to read what you have typed that was another reason i had my suspicions that maybe you were a lot younger than you stated i assume you smoke weed as t2p has a similar problem with punctuation from time to time must be some chemical that damages the brain cells which store information on how to type in paragraphs etc

So please accept my apology :D

an i don't see not even one full stop on your shit so don't pull up my shit an diss me.

you need to be told in person.

[djjwdubz]

and one more thing b4 you say im dumb yeah i no an i dont care so suck my poo while it drops. and u can tell a mod what i say to kick me ass off here cuz like i say i don't care your the only dick head on here and it goes to other dick heads on here who think them the best at everything.

and it was not me who said cgs scotts ugly mom big up to the man who did. thanks from me.

[cgscott]

and one more thing b4 you say im dumb yeah i no an i dont care so suck my poo while its dropping. and u can tell a mod what i say to kick me ass off here cuz like i say i don't care your the only dick head on here.

lol

Dummys out

Why would i tell a mod. Forums are here for help and peoples opinions on things.
I only gave my opinion and aplogized for being wrong.

Plus i never called you dumb or a d**k head. They were your words.

Your maturity shines through fella. :congrats:

[cunny]

Think this thread should be locked now mods.

For more assistance pop over to team xecuter or xbox scene. Guys on there will support you further.