View Full Version : Vito w639 EIS problem after add key akl
razvanrms
4th April, 2022, 07:34 AM
Hello . I have a big problem , after i add key on a w639 2008 (akl situation) , on bench work perfect , but on car , unlock esl , give ignition on , but no crank . On cluster key symbol appear. i wait 30 min with ignition on , but some problem . Someone can check my dumps from eis ? Dump is ori , without add keys
P.s : I add two BE Key's , some problem
Thanks !
automobile
4th April, 2022, 07:41 AM
Does it start with the original key?
razvanrms
4th April, 2022, 07:51 AM
Does it start with the original key?
Is all key lost situation , bro !
automobile
4th April, 2022, 07:52 AM
try to write e key on used channel
Weasel3
4th April, 2022, 08:00 AM
Remove 12V + clamp, from main battery.
Under seat.
Place back.
And test one more time.
razvanrms
4th April, 2022, 08:09 AM
Remove 12V + clamp, from main battery.
Under seat.
Place back.
And test one more time.
Tested , some problem !
automobile
4th April, 2022, 08:18 AM
check can wire from ezs to ecu
dusichek2012
4th April, 2022, 08:52 AM
Check dtc in engine ecu. And look datastream drive authorization, and input output 50kl through can bus.
Отправлено с моего Mi 9T через Tapatalk
bersch8688
4th April, 2022, 09:35 AM
Check with Star Diagnostic EIS give signal to start the engine
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.