PSA ecu bosch 16c34, 16c39, login+checksum

[benci1982]

if someone ecu change in your car and you want to use used ecu, should not be to the virgin mode, i calculate the checksum of the new login. the car start and no errors. write me when problems are up

[MEH]

HI

DONT UNDERSTAND!

can you immo off edc16 psa?

thanks

[alexs307]

Hi. I have recently bought a 307 1.6hdi 9HY, euro3, but engine ECU is missing. I have another ecu from another car, it is the same EDC16c34, can you help me make it work? What do you need?

[benci1982]

everyone was using immo off for psa and citroen???
look 1 post!!!

[Youneselm]

how did you do it?
verry interesting.

[benci1982]

I will not tell, because then I will have a lot of people are smart. If you need help write to me. Have I nice day :)

[mecanodiag]

if someone ecu change in your car and you want to use used ecu, should not be to the virgin mode, i calculate the checksum of the new login. the car start and no errors. write me when problems are up

hi i want to use a used ECU for citroen 1.6 HDI EDC16C34

The old is 0 281 011 802
the used 0 281 013 872 or 0281 012 528 its possible or no ?
thank you

[mastaflex]

0 281 011 802 --> EDC16C34 2.10
0 281 013 872 --> EDC16C34 4.11 for 1.6 HDI

0 281 012 528 --> for 1.4 HDI

[joubliss]

i already changed ecu for edc16c34 and program the code pin without any problem....
the current problem is when u make immo off in adc16 psa the ecu enter in MODE DEGRADED (dont go up 3000 tr/min) if u have a solution of this immo off its more interessting....

Job

[rossoelab]

same problem happened with peugeot 307 (not more than 3000 rpm) after writing ECU
injectors were scodificati, so I've recoded
deleted the data found within the construction vehicle ECU
(such as manual or automatic transmission .... etc etc etc)
solved by downloading Lexia
maybe it's the same problem, I hope I was of help

[benci1982]

here is how it should be given the checksum for edc16 psa and citroen ecu.
this method not for calc checksum for immo off!!!!!!!!!!!!

pass for file is only for top poster+ and up!!!!!!!
pass to pm

[eduardo74]

please pass

here is how it should be given the checksum for edc16 psa and citroen ecu.
this method not for calc checksum for immo off!!!!!!!!!!!!

pass for file is only for top poster+ and up!!!!!!!
pass to pm

[cavignac]

here is how it should be given the checksum for edc16 psa and citroen ecu.
this method not for calc checksum for immo off!!!!!!!!!!!!

pass for file is only for top poster+ and up!!!!!!!
pass to pm

please pass :top:

[ecutoool]

PLEASE PASWORD


AND THANKS

[elosomaloso]

PLEASE!! pass..

[powerchip]

please password

[benci1982]

please password

pass for file is only for top poster+ and up!!!!!!!

sorry.....

[bnad3m]

pass please
Thanks

[chacarita]

Please pass



here is how it should be given the checksum for edc16 psa and citroen ecu.
this method not for calc checksum for immo off!!!!!!!!!!!!

pass for file is only for top poster+ and up!!!!!!!
pass to pm

[greg6969]

Hi please pass.

[obdmaster]

Hi guys did a 2008 fiat scudo with a psa edc16c34, did immo off and when vehicle stationary wouldnt rev over 3,000rpm.

But when vehicle was moving it would rev all the way is this normal behaviour after immo off on psa edc16c34 or could i of cured it by recoding injectors?????

After long test drive there was "no fault codes".

Many thanks

Obd

[benci1982]

hi. it s all good. so goes the new boxer, Ducato...

[Onwuka williams]

if someone ecu change in your car and you want to use used ecu, should not be to the virgin mode, i calculate the checksum of the new login. the car start and no errors. write me when problems are up


Please help bosch 0281011863

[sasy90]

pass please

[benci1982]

Please help bosch 0281011863

hi. try this: only eeprom!!!!!!!!!

[magdex]

Can you Send Pass ! Regards !

[atesbocusu]

pass pls thanks

[sepistar]

hi,
pm me pass please.
regards

[gselectric]

please password

[einet]

Good,
can i have a PW.

einet

[InfoPerformance]

I'm not already Top Poster. But I have a problem and not how to solve. Citroen Xsara Picasso 1.6 HDI - original Ecu 0281011233 - EDC16C3 this ecu is damaged the software. I changed the ECU for a ecu 0281011802. I coded the ecu. The car starts, but I climb the rail excess pressure and stops.
According to Peugeot, is a parameter coded in the coding manual with the PPS. But I haven,t that parameter in the diagnosis.
I tried several soft and I can not run properly. Someone can help me. Or send a correct one EDC16C3 soft ref 0281011233

Thank you.

[samsai]

please pass at( no email addresses to be posted :rulez: no more chances !!! ) thanxxx advonce.

[ROBERTby2000]

pasw plsss .....thanks

here is how it should be given the checksum for edc16 psa and citroen ecu.
this method not for calc checksum for immo off!!!!!!!!!!!!

pass for file is only for top poster+ and up!!!!!!!
pass to pm

[benci1982]

I'm not already Top Poster. But I have a problem and not how to solve. Citroen Xsara Picasso 1.6 HDI - original Ecu 0281011233 - EDC16C3 this ecu is damaged the software. I changed the ECU for a ecu 0281011802. I coded the ecu. The car starts, but I climb the rail excess pressure and stops.
According to Peugeot, is a parameter coded in the coding manual with the PPS. But I haven,t that parameter in the diagnosis.
I tried several soft and I can not run properly. Someone can help me. Or send a correct one EDC16C3 soft ref 0281011233

Thank you.


hi. the 0281011233 ecu is edc16c39, and the 0281011802 is edc16c34 ecu. So I is not never going to be good
sorry for bad english

[kalmar123]

Hi, please pass

[mecadriano]

pass please

[yas200979]

Hi, please pass

[InfoPerformance]

hi. the 0281011233 ecu is edc16c39, and the 0281011802 is edc16c34 ecu. So I is not never going to be good
sorry for bad english

Right. but the reference 0,281,011,233 in Peugeot no longer manufactured and replacement of this is a ecu edc16c34. are compatible for the same vehicle but can not pass data between them. The problem is that I have information from a edc16c34 ecu virgin. But I have problems in this car because it uses a different fuel regulator. And the car is accelerating because the sensor does not cut fuel pressure regulardor. And I can not find software compatible for this car.

[umut60]

please pass

[ademram]

please pass ( no addys to be posted ) THNXX

[javornik]

pass please:celticscarf:

[tinchocbr]

here is how it should be given the checksum for edc16 psa and citroen ecu.
this method not for calc checksum for immo off!!!!!!!!!!!!

pass for file is only for top poster+ and up!!!!!!!
pass to pm
I need the pass please.
Grettings

[ecutoool]

PLEAS I NEED PASWORD

[benci1982]

Use any, good luck for everyone. are no more secretive.
Have all the same, because many people use.
I just do not do it, if you like things come out.
I hate two-faced people!!!!!!!!
(sorry for bad english)

The pass is: edc16 checksum

[kasim_izmir]

here is how it should be given the checksum for edc16 psa and citroen ecu.
this method not for calc checksum for immo off!!!!!!!!!!!!

pass for file is only for top poster+ and up!!!!!!!
pass to pm
Hi mate , please send pass.

BR
kasim

[scarymistake]

here is how it should be given the checksum for edc16 psa and citroen ecu.
this method not for calc checksum for immo off!!!!!!!!!!!!

pass for file is only for top poster+ and up!!!!!!!
pass to pm
please pass

thanks
scary

[ahadi]

here is how it should be given the checksum for edc16 psa and citroen ecu.
this method not for calc checksum for immo off!!!!!!!!!!!!

pass for file is only for top poster+ and up!!!!!!!
pass to pm

please wheres the Pass ??

[alclot]

here is how it should be given the checksum for edc16 psa and citroen ecu.
this method not for calc checksum for immo off!!!!!!!!!!!!

pass for file is only for top poster+ and up!!!!!!!
pass to pm

sens me pass please
Thanks

[benci1982]

THE PASS IS: edc16 checksum

[LATTINO]

here is how it should be given the checksum for edc16 psa and citroen ecu.
this method not for calc checksum for immo off!!!!!!!!!!!!

pass for file is only for top poster+ and up!!!!!!!
pass to pm


thanks :top:

[Onwuka williams]

this engine is very funny i try the checksum file and immo off for this car but all the same the car startes fine but not accelerating more than 300rpm all you
have to do is get a compleat kit bin whith the transponder code then change your transponde and programme new key BSI 25160 ECU95160 transponder PCF7936

[raimi.s]

here is how it should be given the checksum for edc16 psa and citroen ecu.
this method not for calc checksum for immo off!!!!!!!!!!!!

pass for file is only for top poster+ and up!!!!!!!
pass to pm


please password

[einet]

see post 49

[johnthepilot]

Hi Mate can i have password please
John

[lulu2003]

where do you usually get used EDC16 spare ECU if not found on ebay?!

[Min2xx]

Hi Mate can i have password please
John
Read all up posts before spamming !!! :guns:

[pinkfloyd5eg]

Can't this attached PSA Calc. do PIN calculation for EDC16 , 95160 eeprom ??

[nazar09]

here is how it should be given the checksum for edc16 psa and citroen ecu.
this method not for calc checksum for immo off!!!!!!!!!!!!

pass for file is only for top poster+ and up!!!!!!!
pass to pm
s.a pas help

[benci1982]

s.a pas help


see post 49!!!!!!!!!!!!!!

[antwnhszr]

I can not understand why we put code since we want to help or assist ... or not ... just that my opinion ... sorry if I upset some

[n599fbm]

Hi friend !!.

Please, pss!!!,

Many Tks,

Rgds,

C.

[barti122]

pass please THX

[hamza338]

THE PASS IS: edc16 checksum



read after spam

[borysgo2]

I'm not already Top Poster. But I have a problem and not how to solve. Citroen Xsara Picasso 1.6 HDI - original Ecu 0281011233 - EDC16C3 this ecu is damaged the software. I changed the ECU for a ecu 0281011802. I coded the ecu. The car starts, but I climb the rail excess pressure and stops.
According to Peugeot, is a parameter coded in the coding manual with the PPS. But I haven,t that parameter in the diagnosis.
I tried several soft and I can not run properly. Someone can help me. Or send a correct one EDC16C3 soft ref 0281011233

Thank you.
Hello
I have the same problem. Same ecu's same problem. The 233 one is fitted to engine with CR CP1 pump where fuel regulator is normally closed, the other ones CR CP3 fuel regulator is normally open. I couldnt find any parameter to change to CP1 pump strategy in pps or lexia either. Prapobly I will have to change cr pump. Ps if you find any solution please let me know im under big preassure :P
Thanks

[bouzimeca]

please pass

[kalmar123]

Hi, please pass

[rossoelab]

but is it possible?
just read 2 posts to find passwords

[kst]

PLEASE THE PASSE

[james44000]

edc16 checksum

[angmar]

Pass please !!!

[darwins]

Dear benci1982 & Friends.

I have been looking at the calculation formula and my head is hurting trying to work out how the formula is applied, the images below are from two files here which has had the check sum corrected by benci1982.

Does it work I'm guess it does.. ?


Q1 = Am I right that this is a used ecu to be fitted to the car ? I guess yes..

Q2 = The login has not been changed only a check sum change ? I guess yes..

I'm like a dog with a bone over this Please help me apply this formula before my brain explodes :)

Darwins

PS: I understand if this is PM to me....

Thank you benci1982 for the help

[fareed1302]

can i have the pass
EDC16 checksum don t work
thank you

[magnacin]

Thanks for the password.

[magnacin]

Hello All,
I have a 2009 Peugeot boxer 3.0 which is same platform as Fiat ducato. ECU is 0 281 014 211 and it is currently blocked. Vehicle won't start. I need to recode pin number.

I have pin number: 44556

Just some questions:

a) Does your algorithm supports 5 digit pin code such as mine? If not, what am I supposed to do? runing out of answers...
b) If so, I guess same method is used to get info on the 5th digit.
c) In the formula, where do you get the first codes to XOR with the pin to obtain the code? example "FABE8675" XOR 4A514835 (where does the FABE8675 come from) for each line.
d) Same as above for check sum FD 4D=FFFA-2AD (where does the FFFA come from)
e) Are those codes the same for all ECU's?

Thanks for your help.

[mgaloi]

here is how it should be given the checksum for edc16 psa and citroen ecu.
this method not for calc checksum for immo off!!!!!!!!!!!!

pass for file is only for top poster+ and up!!!!!!!
pass to pm

Thanks man.

[elmaro]

d) Same as above for check sum FD 4D=FFFA-2AD (where does the FFFA come from)0x060: $64 $65 - 01+04= FFFF- FFFA
0x080: $84 $85 - 54+38= FFFF-FF73
0x0A0: $A4 $A5 - AB+C7= FFFF-FE8D

[sarigol45]

hi
please rar pass
thank you very much

[moky]

hi

pass please!

Many thx !

[sunduk112]

hi can pass please!

Many 10x!

[jackeldestripador]

here is how it should be given the checksum for edc16 psa and citroen ecu.
this method not for calc checksum for immo off!!!!!!!!!!!!

pass for file is only for top poster+ and up!!!!!!!
pass to pm

can i have the password for the file.?
Thanks for helping us friend.

[tawaf11]

thanks wiyh this truc good job

[gyapi11]

HI all. Post 44 reveals the mystery

[JOSEPH1975]

here is how it should be given the checksum for edc16 psa and citroen ecu.
this method not for calc checksum for immo off!!!!!!!!!!!!

pass for file is only for top poster+ and up!!!!!!!
pass to pm

Is it possible Password?

Regards.

[gyapi11]

Is it possible Password?

Regards.

POST "44" ?

[rlnservice]

here is how it should be given the checksum for edc16 psa and citroen ecu.
this method not for calc checksum for immo off!!!!!!!!!!!!

pass for file is only for top poster+ and up!!!!!!!
pass to pm


PLEASE PASWORD


THANKS

[pollete]

POST "44"
good luck

[tayeb32]

please password

[sosmecano]

PLEASE PASWORD
AND THANKS

[bricedenice]

Hello

What is the dump from the first file, Engine eprom ??
Is normal 1 MB complete flash ?

Can you help me to make immo off on EDC16c34 from 206 1,4 HDI, ecu is stolen !

[gerasimov]

please password
thanks

[hhp]

Hi,please pw, very thanks you

[klakol]

PASS PLEASE

THX

[kojara]

Pass please
Thanks in advance

[sepistar]

people,why ask for pass instead read the thread,which give joy for those who already did!
br,

[pkatra]

hi
can you send pass please ? regards and tanks...

[auto421]

pass please thank you best regards

[zmeiarm]

Good introduction of the algorithm edc16c34

tnx bro

[gintaras]

PLEASE PASWORD . Thanks

[mishu_b]

PLEASE PASWORD . Thanks

read the topic from the beginning you will find by yourself the pass!

[mpierola]

Pass Please

[philipcoin]

thanks M8,
pass please...

[ivankurtev]

Hello, I have the same problem with the Peugeot Bipper 1.4 HDI 2007 after changing the ECU the car does not want more than 3000 rpm. Can you help me?

[pagautas]

Hello, I have the same problem with the Peugeot Bipper 1.4 HDI 2007 after changing the ECU the car does not want more than 3000 rpm. Can you help me?

Just try to code injectors. It's ususal with edc16

[ivankurtev]

Just try to code injectors. It's ususal with edc16
Injectors are programmed , but the problem is the same, RPM max 3000

[ivankurtev]

I think there is a problem with EEPROM , can someone verify it . Thank You

[pagautas]

first you need to upload it

[ivankurtev]

307804 Thank You

[angelman]

hi can anyone program pincode in ecu edc16 1.4hdi 8hs peugeot bipper?
here original file and pincode.
thank's.
pincode: 67322

[gselectric]

pass please

[blajetoo]

Please pass.

Sent from my SM-G920F using Tapatalk

[absetup]

hi
can i get the pass pls?

thx

[XJTAG]

big job very thank

[daniersms]

Really .....:2in1:

[tolikko1]

PLEASE!! pass..

[Jokoo]

Please Pass..

[gobe]

please pw
edc16checksum.rar (http://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=68061&d=1308471718)

[ynos38]

please password thanks
pleasr test my bdm for 407 1.6 hdi

[digital4u]

Pass Please

[sleco1]

Hello Everybody !

edc16checksum.rar nice work ! Thanks benci1982 BUT ! Only work edc16c34 and c39. Not work edc16c0 and c3.

There is a small difference. There is a little trick ! chksum -2 -3 -4 chk good, not limp mode, not max 3000rpm. immo off good, new PIN good !

I am editing the original edc16checksum.rar and upload it later.

Help You here until then.

Best Regards

[hitechservis]

please pass for : edc16checksum.rar

[AIDIN R O]

Special thanks to benci1982


Grate job !