View Full Version : PSA ecu bosch 16c34, 16c39, login+checksum
benci1982
20th February, 2010, 10:37 AM
if someone ecu change in your car and you want to use used ecu, should not be to the virgin mode, i calculate the checksum of the new login. the car start and no errors. write me when problems are up
MEH
20th February, 2010, 09:18 PM
HI
DONT UNDERSTAND!
can you immo off edc16 psa?
thanks
alexs307
22nd February, 2010, 05:19 PM
Hi. I have recently bought a 307 1.6hdi 9HY, euro3, but engine ECU is missing. I have another ecu from another car, it is the same EDC16c34, can you help me make it work? What do you need?
benci1982
10th June, 2011, 10:47 PM
everyone was using immo off for psa and citroen???
look 1 post!!!
Youneselm
11th June, 2011, 01:47 AM
how did you do it?
verry interesting.
benci1982
11th June, 2011, 08:01 AM
I will not tell, because then I will have a lot of people are smart. If you need help write to me. Have I nice day :)
mecanodiag
12th June, 2011, 10:18 PM
if someone ecu change in your car and you want to use used ecu, should not be to the virgin mode, i calculate the checksum of the new login. the car start and no errors. write me when problems are up
hi i want to use a used ECU for citroen 1.6 HDI EDC16C34
The old is 0 281 011 802
the used 0 281 013 872 or 0281 012 528 its possible or no ?
thank you
mastaflex
12th June, 2011, 10:55 PM
0 281 011 802 --> EDC16C34 2.10
0 281 013 872 --> EDC16C34 4.11 for 1.6 HDI
0 281 012 528 --> for 1.4 HDI
joubliss
13th June, 2011, 09:41 PM
i already changed ecu for edc16c34 and program the code pin without any problem....
the current problem is when u make immo off in adc16 psa the ecu enter in MODE DEGRADED (dont go up 3000 tr/min) if u have a solution of this immo off its more interessting....
Job
rossoelab
13th June, 2011, 11:13 PM
same problem happened with peugeot 307 (not more than 3000 rpm) after writing ECU
injectors were scodificati, so I've recoded
deleted the data found within the construction vehicle ECU
(such as manual or automatic transmission .... etc etc etc)
solved by downloading Lexia
maybe it's the same problem, I hope I was of help
benci1982
19th June, 2011, 09:23 AM
here is how it should be given the checksum for edc16 psa and citroen ecu.
this method not for calc checksum for immo off!!!!!!!!!!!!
pass for file is only for top poster+ and up!!!!!!!
pass to pm
eduardo74
19th June, 2011, 08:12 PM
please pass
here is how it should be given the checksum for edc16 psa and citroen ecu.
this method not for calc checksum for immo off!!!!!!!!!!!!
pass for file is only for top poster+ and up!!!!!!!
pass to pm
cavignac
19th June, 2011, 08:45 PM
here is how it should be given the checksum for edc16 psa and citroen ecu.
this method not for calc checksum for immo off!!!!!!!!!!!!
pass for file is only for top poster+ and up!!!!!!!
pass to pm
please pass :top:
ecutoool
20th June, 2011, 04:14 AM
PLEASE PASWORD
AND THANKS
elosomaloso
20th June, 2011, 10:53 PM
PLEASE!! pass..
powerchip
24th June, 2011, 09:00 AM
please password
benci1982
24th June, 2011, 09:05 AM
please password
pass for file is only for top poster+ and up!!!!!!!
sorry.....
bnad3m
24th June, 2011, 12:25 PM
pass please
Thanks
chacarita
24th June, 2011, 04:58 PM
Please pass
here is how it should be given the checksum for edc16 psa and citroen ecu.
this method not for calc checksum for immo off!!!!!!!!!!!!
pass for file is only for top poster+ and up!!!!!!!
pass to pm
greg6969
25th June, 2011, 08:11 AM
Hi please pass.
obdmaster
26th June, 2011, 07:29 PM
Hi guys did a 2008 fiat scudo with a psa edc16c34, did immo off and when vehicle stationary wouldnt rev over 3,000rpm.
But when vehicle was moving it would rev all the way is this normal behaviour after immo off on psa edc16c34 or could i of cured it by recoding injectors?????
After long test drive there was "no fault codes".
Many thanks
Obd
benci1982
27th June, 2011, 06:45 AM
hi. it s all good. so goes the new boxer, Ducato...
Onwuka williams
27th June, 2011, 12:45 PM
if someone ecu change in your car and you want to use used ecu, should not be to the virgin mode, i calculate the checksum of the new login. the car start and no errors. write me when problems are up
Please help bosch 0281011863
sasy90
27th June, 2011, 01:04 PM
pass please
benci1982
27th June, 2011, 04:29 PM
Please help bosch 0281011863
hi. try this: only eeprom!!!!!!!!!
magdex
28th June, 2011, 07:13 PM
Can you Send Pass ! Regards !
atesbocusu
29th June, 2011, 01:44 PM
pass pls thanks
sepistar
30th June, 2011, 12:44 PM
hi,
pm me pass please.
regards
gselectric
30th June, 2011, 02:51 PM
please password
einet
30th June, 2011, 06:02 PM
Good,
can i have a PW.
einet
InfoPerformance
1st July, 2011, 01:36 PM
I'm not already Top Poster. But I have a problem and not how to solve. Citroen Xsara Picasso 1.6 HDI - original Ecu 0281011233 - EDC16C3 this ecu is damaged the software. I changed the ECU for a ecu 0281011802. I coded the ecu. The car starts, but I climb the rail excess pressure and stops.
According to Peugeot, is a parameter coded in the coding manual with the PPS. But I haven,t that parameter in the diagnosis.
I tried several soft and I can not run properly. Someone can help me. Or send a correct one EDC16C3 soft ref 0281011233
Thank you.
samsai
1st July, 2011, 02:43 PM
please pass at( no email addresses to be posted :rulez: no more chances !!! ) thanxxx advonce.
ROBERTby2000
1st July, 2011, 08:08 PM
pasw plsss .....thanks
here is how it should be given the checksum for edc16 psa and citroen ecu.
this method not for calc checksum for immo off!!!!!!!!!!!!
pass for file is only for top poster+ and up!!!!!!!
pass to pm
benci1982
1st July, 2011, 10:48 PM
I'm not already Top Poster. But I have a problem and not how to solve. Citroen Xsara Picasso 1.6 HDI - original Ecu 0281011233 - EDC16C3 this ecu is damaged the software. I changed the ECU for a ecu 0281011802. I coded the ecu. The car starts, but I climb the rail excess pressure and stops.
According to Peugeot, is a parameter coded in the coding manual with the PPS. But I haven,t that parameter in the diagnosis.
I tried several soft and I can not run properly. Someone can help me. Or send a correct one EDC16C3 soft ref 0281011233
Thank you.
hi. the 0281011233 ecu is edc16c39, and the 0281011802 is edc16c34 ecu. So I is not never going to be good
sorry for bad english
kalmar123
2nd July, 2011, 08:54 AM
Hi, please pass
mecadriano
3rd July, 2011, 10:40 PM
pass please
yas200979
5th July, 2011, 06:33 PM
Hi, please pass
InfoPerformance
6th July, 2011, 03:38 PM
hi. the 0281011233 ecu is edc16c39, and the 0281011802 is edc16c34 ecu. So I is not never going to be good
sorry for bad english
Right. but the reference 0,281,011,233 in Peugeot no longer manufactured and replacement of this is a ecu edc16c34. are compatible for the same vehicle but can not pass data between them. The problem is that I have information from a edc16c34 ecu virgin. But I have problems in this car because it uses a different fuel regulator. And the car is accelerating because the sensor does not cut fuel pressure regulardor. And I can not find software compatible for this car.
umut60
6th July, 2011, 05:45 PM
please pass
ademram
10th July, 2011, 06:06 PM
please pass ( no addys to be posted ) THNXX
javornik
11th July, 2011, 12:43 PM
pass please:celticscarf:
tinchocbr
11th July, 2011, 12:46 PM
here is how it should be given the checksum for edc16 psa and citroen ecu.
this method not for calc checksum for immo off!!!!!!!!!!!!
pass for file is only for top poster+ and up!!!!!!!
pass to pm
I need the pass please.
Grettings
ecutoool
11th July, 2011, 08:29 PM
PLEAS I NEED PASWORD
benci1982
12th July, 2011, 08:04 AM
Use any, good luck for everyone. are no more secretive.
Have all the same, because many people use.
I just do not do it, if you like things come out.
I hate two-faced people!!!!!!!!
(sorry for bad english)
The pass is: edc16 checksum
kasim_izmir
12th July, 2011, 09:28 AM
here is how it should be given the checksum for edc16 psa and citroen ecu.
this method not for calc checksum for immo off!!!!!!!!!!!!
pass for file is only for top poster+ and up!!!!!!!
pass to pm
Hi mate , please send pass.
BR
kasim
scarymistake
25th August, 2011, 04:13 PM
here is how it should be given the checksum for edc16 psa and citroen ecu.
this method not for calc checksum for immo off!!!!!!!!!!!!
pass for file is only for top poster+ and up!!!!!!!
pass to pm
please pass
thanks
scary
ahadi
26th August, 2011, 11:33 AM
here is how it should be given the checksum for edc16 psa and citroen ecu.
this method not for calc checksum for immo off!!!!!!!!!!!!
pass for file is only for top poster+ and up!!!!!!!
pass to pm
please wheres the Pass ??
alclot
2nd September, 2011, 09:56 AM
here is how it should be given the checksum for edc16 psa and citroen ecu.
this method not for calc checksum for immo off!!!!!!!!!!!!
pass for file is only for top poster+ and up!!!!!!!
pass to pm
sens me pass please
Thanks
benci1982
2nd September, 2011, 11:22 AM
THE PASS IS: edc16 checksum
LATTINO
3rd September, 2011, 01:43 AM
here is how it should be given the checksum for edc16 psa and citroen ecu.
this method not for calc checksum for immo off!!!!!!!!!!!!
pass for file is only for top poster+ and up!!!!!!!
pass to pm
thanks :top:
Onwuka williams
6th September, 2011, 12:50 PM
this engine is very funny i try the checksum file and immo off for this car but all the same the car startes fine but not accelerating more than 300rpm all you
have to do is get a compleat kit bin whith the transponder code then change your transponde and programme new key BSI 25160 ECU95160 transponder PCF7936
raimi.s
6th September, 2011, 01:47 PM
here is how it should be given the checksum for edc16 psa and citroen ecu.
this method not for calc checksum for immo off!!!!!!!!!!!!
pass for file is only for top poster+ and up!!!!!!!
pass to pm
please password
einet
6th September, 2011, 07:25 PM
see post 49
johnthepilot
12th September, 2011, 10:30 PM
Hi Mate can i have password please
John
lulu2003
12th September, 2011, 11:00 PM
where do you usually get used EDC16 spare ECU if not found on ebay?!
Min2xx
17th September, 2011, 10:07 PM
Hi Mate can i have password please
John
Read all up posts before spamming !!! :guns:
pinkfloyd5eg
25th September, 2011, 04:12 AM
Can't this attached PSA Calc. do PIN calculation for EDC16 , 95160 eeprom ??
nazar09
28th September, 2011, 01:06 PM
here is how it should be given the checksum for edc16 psa and citroen ecu.
this method not for calc checksum for immo off!!!!!!!!!!!!
pass for file is only for top poster+ and up!!!!!!!
pass to pm
s.a pas help
benci1982
28th September, 2011, 01:08 PM
s.a pas help
see post 49!!!!!!!!!!!!!!
antwnhszr
30th September, 2011, 08:40 AM
I can not understand why we put code since we want to help or assist ... or not ... just that my opinion ... sorry if I upset some
n599fbm
30th September, 2011, 08:46 AM
Hi friend !!.
Please, pss!!!,
Many Tks,
Rgds,
C.
barti122
30th September, 2011, 12:34 PM
pass please THX
hamza338
1st October, 2011, 12:03 PM
THE PASS IS: edc16 checksum
read after spam
borysgo2
29th October, 2011, 11:09 PM
I'm not already Top Poster. But I have a problem and not how to solve. Citroen Xsara Picasso 1.6 HDI - original Ecu 0281011233 - EDC16C3 this ecu is damaged the software. I changed the ECU for a ecu 0281011802. I coded the ecu. The car starts, but I climb the rail excess pressure and stops.
According to Peugeot, is a parameter coded in the coding manual with the PPS. But I haven,t that parameter in the diagnosis.
I tried several soft and I can not run properly. Someone can help me. Or send a correct one EDC16C3 soft ref 0281011233
Thank you.
Hello
I have the same problem. Same ecu's same problem. The 233 one is fitted to engine with CR CP1 pump where fuel regulator is normally closed, the other ones CR CP3 fuel regulator is normally open. I couldnt find any parameter to change to CP1 pump strategy in pps or lexia either. Prapobly I will have to change cr pump. Ps if you find any solution please let me know im under big preassure :P
Thanks
bouzimeca
30th October, 2011, 12:34 AM
please pass
kalmar123
1st November, 2011, 06:32 PM
Hi, please pass
rossoelab
2nd November, 2011, 01:02 AM
but is it possible?
just read 2 posts to find passwords
kst
18th June, 2012, 08:41 AM
PLEASE THE PASSE
james44000
20th June, 2012, 11:55 AM
edc16 checksum
angmar
21st June, 2012, 04:04 AM
Pass please !!!
darwins
25th June, 2012, 12:14 AM
Dear benci1982 & Friends.
I have been looking at the calculation formula and my head is hurting trying to work out how the formula is applied, the images below are from two files here which has had the check sum corrected by benci1982.
Does it work I'm guess it does.. ?
Q1 = Am I right that this is a used ecu to be fitted to the car ? I guess yes..
Q2 = The login has not been changed only a check sum change ? I guess yes..
I'm like a dog with a bone over this Please help me apply this formula before my brain explodes :)
Darwins
PS: I understand if this is PM to me....
Thank you benci1982 for the help
fareed1302
10th July, 2012, 05:50 PM
can i have the pass
EDC16 checksum don t work
thank you
magnacin
11th July, 2012, 07:49 PM
Thanks for the password.
magnacin
11th July, 2012, 07:55 PM
Hello All,
I have a 2009 Peugeot boxer 3.0 which is same platform as Fiat ducato. ECU is 0 281 014 211 and it is currently blocked. Vehicle won't start. I need to recode pin number.
I have pin number: 44556
Just some questions:
a) Does your algorithm supports 5 digit pin code such as mine? If not, what am I supposed to do? runing out of answers...
b) If so, I guess same method is used to get info on the 5th digit.
c) In the formula, where do you get the first codes to XOR with the pin to obtain the code? example "FABE8675" XOR 4A514835 (where does the FABE8675 come from) for each line.
d) Same as above for check sum FD 4D=FFFA-2AD (where does the FFFA come from)
e) Are those codes the same for all ECU's?
Thanks for your help.
mgaloi
13th July, 2012, 07:40 PM
here is how it should be given the checksum for edc16 psa and citroen ecu.
this method not for calc checksum for immo off!!!!!!!!!!!!
pass for file is only for top poster+ and up!!!!!!!
pass to pm
Thanks man.
elmaro
14th July, 2012, 07:07 PM
d) Same as above for check sum FD 4D=FFFA-2AD (where does the FFFA come from)0x060: $64 $65 - 01+04= FFFF- FFFA
0x080: $84 $85 - 54+38= FFFF-FF73
0x0A0: $A4 $A5 - AB+C7= FFFF-FE8D
sarigol45
25th November, 2012, 10:32 PM
hi
please rar pass
thank you very much
moky
27th November, 2012, 07:29 PM
hi
pass please!
Many thx !
sunduk112
28th November, 2012, 11:46 AM
hi can pass please!
Many 10x!
jackeldestripador
28th November, 2012, 11:57 AM
here is how it should be given the checksum for edc16 psa and citroen ecu.
this method not for calc checksum for immo off!!!!!!!!!!!!
pass for file is only for top poster+ and up!!!!!!!
pass to pm
can i have the password for the file.?
Thanks for helping us friend.
tawaf11
28th November, 2012, 05:20 PM
thanks wiyh this truc good job
gyapi11
28th November, 2012, 10:22 PM
HI all. Post 44 reveals the mystery
JOSEPH1975
1st December, 2012, 05:43 PM
here is how it should be given the checksum for edc16 psa and citroen ecu.
this method not for calc checksum for immo off!!!!!!!!!!!!
pass for file is only for top poster+ and up!!!!!!!
pass to pm
Is it possible Password?
Regards.
gyapi11
1st December, 2012, 05:59 PM
Is it possible Password?
Regards.
POST "44" ?
rlnservice
3rd December, 2012, 02:35 PM
here is how it should be given the checksum for edc16 psa and citroen ecu.
this method not for calc checksum for immo off!!!!!!!!!!!!
pass for file is only for top poster+ and up!!!!!!!
pass to pm
PLEASE PASWORD
THANKS
pollete
3rd December, 2012, 06:13 PM
POST "44"
good luck
tayeb32
6th December, 2012, 11:26 AM
please password
sosmecano
7th December, 2012, 12:55 AM
PLEASE PASWORD
AND THANKS
bricedenice
9th December, 2012, 06:56 AM
Hello
What is the dump from the first file, Engine eprom ??
Is normal 1 MB complete flash ?
Can you help me to make immo off on EDC16c34 from 206 1,4 HDI, ecu is stolen !
gerasimov
8th December, 2013, 11:39 PM
please password
thanks
hhp
10th December, 2013, 08:24 AM
Hi,please pw, very thanks you
klakol
28th May, 2014, 02:26 AM
PASS PLEASE
THX
kojara
22nd September, 2014, 10:28 AM
Pass please
Thanks in advance
sepistar
22nd September, 2014, 02:23 PM
people,why ask for pass instead read the thread,which give joy for those who already did!
br,
pkatra
23rd September, 2014, 07:29 PM
hi
can you send pass please ? regards and tanks...
auto421
24th September, 2014, 07:01 AM
pass please thank you best regards
zmeiarm
24th September, 2014, 12:14 PM
Good introduction of the algorithm edc16c34
tnx bro
gintaras
5th November, 2014, 08:50 PM
PLEASE PASWORD . Thanks
mishu_b
10th November, 2014, 01:58 PM
PLEASE PASWORD . Thanks
read the topic from the beginning you will find by yourself the pass!
mpierola
30th March, 2015, 07:56 PM
Pass Please
philipcoin
30th March, 2015, 10:53 PM
thanks M8,
pass please...
ivankurtev
2nd April, 2015, 11:02 PM
Hello, I have the same problem with the Peugeot Bipper 1.4 HDI 2007 after changing the ECU the car does not want more than 3000 rpm. Can you help me?
pagautas
4th April, 2015, 08:18 AM
Hello, I have the same problem with the Peugeot Bipper 1.4 HDI 2007 after changing the ECU the car does not want more than 3000 rpm. Can you help me?
Just try to code injectors. It's ususal with edc16
ivankurtev
4th April, 2015, 08:35 AM
Just try to code injectors. It's ususal with edc16
Injectors are programmed , but the problem is the same, RPM max 3000
ivankurtev
4th April, 2015, 08:43 AM
I think there is a problem with EEPROM , can someone verify it . Thank You
pagautas
4th April, 2015, 08:45 AM
first you need to upload it
ivankurtev
4th April, 2015, 09:03 AM
307804 Thank You
angelman
27th April, 2016, 12:31 PM
hi can anyone program pincode in ecu edc16 1.4hdi 8hs peugeot bipper?
here original file and pincode.
thank's.
pincode: 67322
gselectric
28th April, 2016, 10:14 AM
pass please
blajetoo
3rd June, 2016, 12:59 AM
Please pass.
Sent from my SM-G920F using Tapatalk
absetup
25th October, 2016, 08:23 PM
hi
can i get the pass pls?
thx
XJTAG
15th August, 2017, 02:21 AM
big job very thank
daniersms
15th August, 2017, 05:33 AM
Really .....:2in1:
tolikko1
11th August, 2018, 09:26 AM
PLEASE!! pass..
Jokoo
20th August, 2018, 03:05 PM
Please Pass..
gobe
23rd August, 2018, 12:48 PM
please pw
edc16checksum.rar (http://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=68061&d=1308471718)
ynos38
6th September, 2018, 10:54 PM
please password thanks
pleasr test my bdm for 407 1.6 hdi
digital4u
2nd January, 2020, 08:19 PM
Pass Please
sleco1
16th November, 2023, 08:33 AM
Hello Everybody !
edc16checksum.rar nice work ! Thanks benci1982 BUT ! Only work edc16c34 and c39. Not work edc16c0 and c3.
There is a small difference. There is a little trick ! chksum -2 -3 -4 chk good, not limp mode, not max 3000rpm. immo off good, new PIN good !
I am editing the original edc16checksum.rar and upload it later.
Help You here until then.
Best Regards
hitechservis
7th December, 2023, 05:46 PM
please pass for : edc16checksum.rar
AIDIN R O
24th January, 2024, 01:09 PM
Special thanks to benci1982
Grate job !
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.