PDA

View Full Version : SBB [CHINA] KEY PROGRAMMING TOOL UPDATE



devil09
20th February, 2010, 11:19 PM
HELLO,Everyone,
Herewith i am giving update 9/2009 to DK MEMBERS. please find here in attached file.


post your reply i will help you.

youssef70
21st February, 2010, 12:05 AM
HELLO,ANYONE NEED HERE SBB [CHINA] CLONE VERSION LATEST FEB.2010 UPDATE PLEASE PM ME
I WILL HELP YOU.
for me i have one totaly dead...
can you help me ?

devil09
21st February, 2010, 01:59 AM
for me i have one totaly dead...
can you help me ?
SORRY TO SAY BUT I M NOT REPAIRER I CAN GIVE YOU ONLY UPDATE OTHERTHING I DNT KNOW SEND BACK TO YOUR SUPPLIER

AUS-MAN
21st February, 2010, 02:53 AM
HELLO,ANYONE NEED HERE SBB [CHINA] CLONE VERSION LATEST FEB.2010 UPDATE PLEASE PM ME
I WILL HELP YOU.

Chetan do you have a list of all the vehicles supported with latest update?

teerak2uk
21st February, 2010, 04:34 PM
Is this a good tool or not and have you had any problems with it


thanks

ray-ray
21st February, 2010, 05:36 PM
sbb do work from china,it seem that the early stuff don't.the ones that take a adaptor with the t-code,are the ones that don't work with sbb.there are many units out there with current update,but flags are not turn on.the software comes complete all full loaded,but flags need to be turn on for it to work .

teerak2uk
21st February, 2010, 06:09 PM
sbb do work from china,it seem that the early stuff don't.the ones that take a adaptor with the t-code,are the ones that don't work with sbb.there are many units out there with current update,but flags are not turn on.the software comes complete all full loaded,but flags need to be turn on for it to work .

how do you go about the flags being turned on

Dragi
22nd February, 2010, 01:01 AM
HI!I read your post for update China`s SBB(clon) and I have SBB and need update for him,but if you can tell me the procedure...
Thanks

ray-ray
22nd February, 2010, 05:23 PM
i e-mail him a few days ago with no reply,he might be busy.i think you need a special card to release the flags.i know that silca release 7 new upgrade for these unit.

azimut-net
22nd February, 2010, 07:11 PM
HI!I read your post for update China`s SBB(clon) and I have SBB and need update for him,but if you can tell me the procedure...
Thanks

You need silca update program and rs 232 cabel to connect sbb to computer.

If you have rs232 cabel i can send you silca update program.

But i also need new update Feb.2010.

regards Primo :wink:

Dragi
22nd February, 2010, 10:54 PM
Can you tell me how to update my SBB...and where I can download the software for him!
thanks

teerak2uk
23rd February, 2010, 12:46 AM
China ECU Tools Centre (http://www.ecutool.com/productshow.asp?id=1301&sortsid=3511&sorts=)

azimut-net
23rd February, 2010, 08:09 AM
Can you tell me how to update my SBB...and where I can download the software for him!
thanks

Here is the link to download WinTransfer silca update program.:wink:

MEGAUPLOAD - The leading online storage and file delivery service (http://www.megaupload.com/?d=3TPNJN5B)

Hiej
23rd February, 2010, 09:24 AM
is that the version that kills the CHINA clones or the special made by chetan?

gokey
23rd February, 2010, 09:36 AM
@ chetan

what version do you mean?
mine is
SW - 26.00.117
DB - 29.00

azimut-net
23rd February, 2010, 09:43 AM
is that the version that kills the CHINA clones or the special made by chetan?

this is the version i get with my china sbb.
i dont know if they kill ssb. Didnt update yet.

ray-ray
23rd February, 2010, 04:58 PM
we are still waiting on "chetan" to share his knowledge with us.

kautuvera
24th February, 2010, 02:40 AM
I wanna programming remote control of huyndai Sonata year 2007
Can you ?

ray-ray
24th February, 2010, 06:04 AM
china scan tool call ctl 100 or ctl 200 cost around $300.00 usd.

devil09
19th March, 2010, 12:03 AM
Chetan do you have a list of all the vehicles supported with latest update?
give me what vehicle you need in your list i will check for you

jnand
19th March, 2010, 01:02 AM
Where is the update Chetan

keysmith
19th March, 2010, 01:48 AM
My SBB does not communicate with some Chryslers. Is that a hardware or software problem? Will this new update fix it?

D.

jokersat
19th March, 2010, 06:38 PM
CHETAN = BALABLABLABLA

gepakg
19th March, 2010, 06:48 PM
on some chryslers k-line on OBDII is different,try on other pins,except 4 ground and 16 12V...

same on ad100 but without adc138 139 adapters..

regards Gepa


My SBB does not communicate with some Chryslers. Is that a hardware or software problem? Will this new update fix it?

D.

racin-snake
19th March, 2010, 06:56 PM
ime sure from experience the clones fail on hardware on pin 3
rover chrysler do anyway but i think a flylead would cure it if the pinouts were available

gepakg
19th March, 2010, 07:02 PM
on one wrangler 2006 year,from sweeden met that k-line was on 15 pin!

by me easy way is when read pin from SKIM to manual program serial id from 4D...

regards Gepa


ime sure from experience the clones fail on hardware on pin 3
rover chrysler do anyway but i think a flylead would cure it if the pinouts were available

castortroy
20th March, 2010, 12:00 PM
to enable the flags for models you go to enable flags in the start up menu and you have to have a six digit unlock code for each vehicle group. its just like puttingin a pin number. does anyone have that list with a software update. does anyone have an SBB that came with all the models 2009 and back to 1996 for all cars eurpean and domestic that works. i want to order an SDD and don't want an empty shell.

mikeslocks
20th March, 2010, 02:48 PM
TKO update software pdf. ver 28.01 DB 31.02 is newest.

devil09
23rd March, 2010, 12:55 AM
Where is the update Chetan
here is SBB update
CHETAN IS NOT BLA BLA BLA BLA UNDERSTAND ???
press thanks button i will give more updates:guns:

devil09
23rd March, 2010, 12:56 AM
CHETAN = BALABLABLABLA
Originally Posted by jnand http://www.digital-kaos.co.uk/forums/images/styles/digital/buttons/viewpost.gif (http://www.digital-kaos.co.uk/forums/f115/sbb-china-key-programming-tool-update-95657-post506762/#post506762)
Where is the update Chetan

here is SBB update
CHETAN IS NOT BLA BLA BLA BLA UNDERSTAND ???:guns:

keysmith
23rd March, 2010, 03:07 AM
Has anybody tried loading this file to there SBB? Does it work?

D.

devil09
23rd March, 2010, 07:15 AM
Has anybody tried loading this file to there SBB? Does it work?

D.
please try my buddy

jokersat
23rd March, 2010, 01:11 PM
tested on my china SBB 01 2009 update is ok DataBase 28 00 114
no fake dont wory

thanks chetan and sorry

shitad
23rd March, 2010, 03:44 PM
Chetan do you have the latest SBB update ????

devil09
23rd March, 2010, 03:54 PM
Has anybody tried loading this file to there SBB? Does it work?

D.
read#33 post

devil09
23rd March, 2010, 03:58 PM
Chetan do you have the latest SBB update ????
read #29 post

devil09
23rd March, 2010, 04:03 PM
Where is the update Chetan
read#29 post update is their

Jeanhdo
23rd March, 2010, 07:37 PM
not understand anything, I have a sbb of china for more than 6 months and is the same version that was posted here, where is the update?
Regards ...
Jeanhdo

devil09
23rd March, 2010, 09:08 PM
Chetan do you have a list of all the vehicles supported with latest update?
see the post #29 in same forum for update download rar file there is list of vehicles
thanks :ciao: aus man you remember me

shitad
24th March, 2010, 02:23 AM
ver 28.01 DB 31.02 is newest

shonkhor.vd
24th March, 2010, 07:04 PM
try to update...

Jeanhdo
24th March, 2010, 10:38 PM
try to update...
I upgraded, but did not change anything because it is the same version that my machine has.
But the file to update it works perfectly, it might be useful for users who have their dead machine.
Jeanhdo

shitad
25th March, 2010, 01:35 AM
Chetan.
OK so now that I say thanks for the Old file from #29 that works very well, do you now have the latest SBB files ????

mandy86417
25th March, 2010, 08:17 AM
i have Blue screen sbb, it work well, from a good china supplier. very lucky.

malva
25th March, 2010, 02:45 PM
I have 2 SBB machines and I cannot get any communication using win transfer on either? I am using white cable that came with machine

1 SBB works perfectly but the other is now stuck on opening screen. Its like keyboard is no longer working. Anyone experienced this and do we have a fix?

Regards,

Malva

jokersat
25th March, 2010, 04:53 PM
null modem cable like 2====3 3====2 5=====5

cerramak
27th March, 2010, 11:35 AM
Hello Chetan,

I bought six months ago that the SBB in China, and had the version (SW) 24.00.112-version (DB) 26.00.

The SBB brings an update CD, I upgraded to this CD, with the bad luck that I update
online, after updating, the SBB was as if out of tokens, could make everything, except
the PIN CODE which was disabled. I was lucky and not go blank, as I happened to some
you.


Because of this situation, I countershaft SBB CHINA again, and they would update the SBB with the update:

version (SW): 25.00.114
version (DB): 28.00
Updates. : 01/2009

that they believe is the latest update.


The version that is inside. Rar whom you have sent is:

version (SW): 24.00.112

version (DB): 26.00 which is the version that I had when I bought the machine in China.

so you can see I attached two sacks.

I take this opportunity to ask if in some future update, you can schedule
Ford Patch 5 system, which calls outcode / inCode.

thanks for your help

Best regards

marginal
27th March, 2010, 06:20 PM
Well, after the update my SBB stopped working.
Only a blank backlit screen after the power cable is plugged in.

devil09
27th March, 2010, 09:52 PM
Well, after the update my SBB stopped working.
Only a blank backlit screen after the power cable is plugged in.
READ #33 POST IN SAME THREAD I THINK YOU MADE MISTAKE DURING UPDATE. NOW NO USE OF YOUR SBB :devil::devil::devil::devil::devil:

marginal
27th March, 2010, 09:59 PM
What kind of mistake could I have ever made?
It updated OK, I disconnected it from the PC, turned it on, it worked, turned it off, then back on and no more SBB.

keysmith
28th March, 2010, 08:45 PM
I can't update my SBB because none of my computers have a 9 pin RS232 port. Would a USB to RS232 cable work?

D.

marginal
28th March, 2010, 09:28 PM
Of course it would, that's what I was using.
Good luck with the firmware update though ...

todos
31st March, 2010, 07:12 PM
Hello everyone can someone solve a probblema, I have a vore sbb updated but when I connect my computer to see photos from this probblema thanks to all ...

marginal
31st March, 2010, 07:15 PM
Hola todos ...
When you connect it alone, what do you see on the screen after boot up?

todos
31st March, 2010, 08:03 PM
schema see this ...

version (SW): 25.00.114
version (DB): 28.00
Updates. : 01/2009

todos
31st March, 2010, 08:21 PM
I did not connect with the computer sbb, rs232 port gives me error, see attached

marginal
31st March, 2010, 08:38 PM
I saw it hombre.
I just wanted to make sure it boots up.
As for the problem you have I can not help you unfortunately.
Sorry, good luck.

Recoder
1st April, 2010, 01:13 AM
Hi there Todos .
Try different RS232 settings ie Baud rate i.e 9600 etc com 1 ,2 etc .
Also make sure lead is correct .
Hop ethis helps .
P.S dont check for update online it will get zapped it you upload to it from Silca if its a China Clone?.

todos
1st April, 2010, 10:19 AM
hello, recoder thank you for your reply, I tried to change the baud rate, com port 1,2,3,4, but no way the answer is always the same, sbb is a Chinese clone

marginal
1st April, 2010, 01:28 PM
Todos, do you use a USB or a serial port on your computer to connect the SBB?

Recoder
1st April, 2010, 06:18 PM
Well todos make a lead or check your lead and see if it is the same as the one on this thread (Previous post )by Jokersat
I have jeard that the macines can come with wrong cables ?.
HTH

todos
1st April, 2010, 07:28 PM
Recode 232 null modem serial cable to the controlled person, I have 3 cables and does not go, pin (2 --- 3-3 ---- 2, .5-5)

Recoder
2nd April, 2010, 03:57 PM
Can you try another computer ?.

todos
2nd April, 2010, 09:09 PM
Recoder Hello, I fixed the door 232 in short, an application can update it through internet? Thank you

Recoder
3rd April, 2010, 12:15 AM
Do you mean a driver for the 232 port ???.
Do not update internet Upgrade for sbb?????????/?
HTH

todos
3rd April, 2010, 02:53 PM
:manutop:grazie

todos
3rd April, 2010, 02:54 PM
:manutop:thanks:manutop:

justy22
3rd April, 2010, 07:28 PM
Where do you all purchase ur blanks for this machine

marginal
4th April, 2010, 06:44 AM
China of course ...

jackeldestripador
5th April, 2010, 07:41 PM
thanks i will try on sbb i had an old version i think that it going to work

Hxrxld
20th April, 2010, 06:39 PM
I have:

Ver SW 23.01.111
Ver DB 25.00
Update 01/2009

I have WINTRANSFER, and a USB to RS232 Converter with a driver installed. But when I try to run it with program it says the device has failed =(

What should I do?

seed_mom
23rd April, 2010, 04:20 PM
Can you send me another have shown a sbb chine

seed_mom
23rd April, 2010, 04:21 PM
Can you send me another have shown a sbb chine
update 2010

pkeeney
25th April, 2010, 05:36 PM
Thanks lol

pkeeney
26th April, 2010, 05:43 AM
Has any one figured how to fix sbb yet. I got two of them that need to be reprogrammed do to a bad update. There has to be a way to re-flash raw data back into device. Or just have to re-flash the eprom so i can connect it to my pc to reload data.

I can give it a shot if some one has the eprom .bin file from a working sbb.

langatp
26th April, 2010, 07:05 AM
Hi,

i'm looking for software for x431 toolkit my id number was forbidden help me out

devil09
26th April, 2010, 07:45 PM
Hi,

i'm looking for software for x431 toolkit my id number was forbidden help me out
wrong topic in this thread this is SBB post please talk about SBB not for launch x431 ok?:stupid:

maxsek
1st May, 2010, 12:23 PM
what is the new version of ssb avalaible?????
I have a ver:
SW 25.00.114
db 28.00
Can i help me for upgrade????

pkeeney
2nd May, 2010, 05:19 PM
I don't know if this would be any help getting the sbb talking to the pc software if we were to re-flash the lt1133acsw 24 pin soic chip located by the rs232 port.

You think this might work.

Here is the schematics of the chip
http://www.linear.com/pc/downloadDocument.do?navId=H0,C1,C1007,C1016,P1298, D2833

jack075
13th May, 2010, 08:57 PM
Hi to every body

piciu82
13th May, 2010, 09:28 PM
is there a way to connect with chrysler using sbb ???

devil09
13th May, 2010, 10:59 PM
is there a way to connect with chrysler using sbb ???
NO :banghead:

keysmith
14th May, 2010, 02:53 AM
NO :banghead:

Not true, some SBB clones communicate and work with the CAN Chryslers. But none of them work for Type 1 or 2. I have 2 SBB and the first one I bought will program keys but the newer one does not communicate at all with Chrysler.

D.

baroutes
16th May, 2010, 09:45 PM
hi there!! i'm little confused. I have a sbb (clone) with version 28. Is this update a newer one? Thank you!!

devil09
16th May, 2010, 11:29 PM
hi there!! i'm little confused. I have a sbb (clone) with version 28. Is this update a newer one? Thank you!!
sorry it is same NOT NEW

sc202
17th May, 2010, 07:51 AM
devil09
what is your version of the update

Maloi
24th May, 2010, 04:44 PM
а 2010 апдейт не у кого нет? номер прибора 1100221131017
and 2010 update no one has? " Reference device 1100221131017

Jeanhdo
2nd June, 2010, 05:41 AM
Any news about the new version of sbb?
2010 release?
If someone has this version, please let me know.
Thank you all.
Jeanhdo

devil09
3rd June, 2010, 03:32 AM
Any news about the new version of sbb?
2010 release?
If someone has this version, please let me know.
Thank you all.
Jeanhdo
yes released but not sure we have to wait for 2010 atleast one month

BimmerGT1
3rd June, 2010, 04:08 AM
HELLO,ANYONE NEED HERE SBB [CHINA] CLONE VERSION LATEST FEB.2010 UPDATE PLEASE PM ME
I WILL HELP YOU.


hi, Hola si hablas espa?ol por favor enviamelaactualizacion, gracias,If you can help me please send the update for sbb thank you.


Wilson

soportech@live.com

mdautotech
20th June, 2010, 03:26 PM
Hi !

I have a SBB with ver 2009 from china working, i would like to update to ver 2010 ......

pleaseeee

thanks

Ttech:bounce:

marginal
20th June, 2010, 03:27 PM
Be VERY careful ...

mdautotech
20th June, 2010, 03:32 PM
yes please hello !!

I need 2010

I have 2009 clone working

please help with software thanks !!!!

Ttech

mdautotech
20th June, 2010, 03:35 PM
was that reply 4 me ? what should i watch 4 ?

teerak2uk
20th June, 2010, 03:36 PM
can someone advise on this as maybe looking to get one so

is it a good tool
what about tokens
is it all done via obd
what transponders are otp (one time programmable)


many thanks

mdautotech
20th June, 2010, 03:42 PM
yes it works fine for how much it costs it paid 4 itself and has no timeout on it !!:bike:

Ttech

basco
20th June, 2010, 03:43 PM
Dont want to hi jak this thread guys but does anyone have latest mvp update for mvp keyprogrammer?

mdautotech
20th June, 2010, 03:45 PM
no lol

send me the link when u find it !!

thanks

Ttech

:secruity:

marginal
20th June, 2010, 06:49 PM
was that reply 4 me ? what should i watch 4 ?
Not to srap it while updating it as I did with mine.

Iggie
24th June, 2010, 02:20 PM
Does anyone else here have a problem with SBB when press ENTER button nothing happens? But it works when it is plugged on the power cord (220V).

SOLVED!

teerak2uk
24th June, 2010, 02:55 PM
Does anyone else here have a problem with SBB when press ENTER button nothing happens? But it works when it is plugged on the power cord (220V).

SOLVED!

how was it solved and does anyone have a list of supported cars


thanks

jlope69
24th June, 2010, 08:47 PM
will it do the t300

ajatochaveiro
29th June, 2010, 02:13 PM
update 2010 SBB has ?

gadroulll
9th July, 2010, 07:30 PM
i am looking to buy sbb .
this moment they are two versions 2009 and 2010 v31

2009 costs 195 us+
2010 costs 300us +

my first choice is ecutool 195us but 2009 version

these two hadware 2009 ,2010 has different?

site i look are keymam,car2diag ecutool, nkaay,obdautosan can,obd2cartools,allobdtooluutech,carsung.net

Can somemone suggest me from these companies which is more reliable ?

has someone buy new 2010 ?which company?can accept updates?

thanks to all

devil09
9th July, 2010, 09:36 PM
buy 2010 version from ecutool co. is the best on co. in china.others are mostly cheaters. so becareful while buying goods from china. version 2010 price is 250usd you have to bargain during purchasing from china.
chinese giving discount when you bargain. because they need business

johnfox1
11th July, 2010, 07:14 AM
Anyone please submit the 2010 update if they will make one.
I`ll pray on your cars picture!

johnfox1
11th July, 2010, 07:16 AM
а 2010 апдейт не у кого нет? номер прибора 1100221131017
and 2010 update no one has? " Reference device 1100221131017

Будет , скажем!

polat
27th July, 2010, 03:48 PM
Hİ HELP HELP ME SBB KEY

johnJay
27th July, 2010, 06:41 PM
Can i have the v28 clone just wipe mine out after upgrading to v30 2010 , Now my screen is blank

adegbayi
31st July, 2010, 01:58 PM
is this the latest update for 2010

Automat
31st July, 2010, 07:54 PM
I believe it's Version 31

devil09
31st July, 2010, 08:08 PM
[QUOTE=polat;698605]Hİ HELP HELP ME SBB KEY[/QUOTE
you have to go on first page of this thread
you will find update for your SBB
please upload update date into your sbb & it will work fine

devil09
31st July, 2010, 08:10 PM
Anyone please submit the 2010 update if they will make one.
I`ll pray on your cars picture!
Dear clone sbb you can update upto 28.00 version you can not do more update on same SBB if you need 31.00version you have to buy new version please understand this is perfect game from chinese people they gives update on their old version upto 28.00 then they change chip inside so you have to buy new one SBB

canorivera
31st July, 2010, 09:01 PM
Dear clone sbb you can update upto 28.00 version you can not do more update on same SBB if you need 31.00version you have to buy new version please understand this is perfect game from chinese people they gives update on their old version upto 28.00 then they change chip inside so you have to buy new one SBB


Yes you are rigth, they say that's a different unit and that new one can't be updated, just a trick to increase price from $180 to $300 hehe....

ray-ray
1st August, 2010, 03:04 AM
on the t300 and mvp no more update "AD" has stop working with these unit...... and the china clone are missing a mac232 chip so no data tranfer can be up loaded. i have bought over 30 unit SBB china clone lastest version 31. the going price is $220.00 to $265.00 at that price use your old SBB as a parts out unit. salvage the key board the screen ,cable ,chip... hope it helps!

canorivera
1st August, 2010, 04:01 PM
on the t300 and mvp no more update "AD" has stop working with these unit...... and the china clone are missing a mac232 chip so no data tranfer can be up loaded. i have bought over 30 unit SBB china clone lastest version 31. the going price is $220.00 to $265.00 at that price use your old SBB as a parts out unit. salvage the key board the screen ,cable ,chip... hope it helps!

Hi ray-ray, where do you buy SBB v31 for $265 ???

Thanks

marcela
8th August, 2010, 11:52 PM
hello all,
this is the newest version for china clone sbb key 31

:celticparty:

http://www.sinodownloads.com/down/download/ecutool/SBB.rar (http://www.sinodownloads.com/down/download/ecutool/SBB.rar)

devil09
9th August, 2010, 08:41 PM
hello all,
this is the newest version for china clone sbb key 31

:celticparty:

http://www.sinodownloads.com/down/download/ecutool/SBB.rar (http://www.sinodownloads.com/down/download/ecutool/SBB.rar)
Dear clone sbb you can update upto 28.00 version you can not do more update on same SBB if you need 31.00version you have to buy new version please understand this is perfect game from chinese people they gives update on their old version upto 28.00 then they change chip inside so you have to buy new one SBB

devil09
9th August, 2010, 09:15 PM
Hİ HELP HELP ME SBB KEY
your sbb is not update chip inside for update procedure so send back to your supplier soon

joe40
10th August, 2010, 01:38 PM
Got my v31 in the mail a few days ago. It came with an rs 232 cable but my computer does not have this port. What solution should I take?

Another cable?

or get a port for computer?

teerak2uk
10th August, 2010, 05:24 PM
Got my v31 in the mail a few days ago. It came with an rs 232 cable but my computer does not have this port. What solution should I take?




Another cable?

or get a port for computer?

Look for usb to rs 232 on fleabay

abco
11th August, 2010, 09:23 PM
I spoke with person that I bought SBB machine from China, and he said that newer program will not support new update for the sbb older version (ver 28.00 to ver 31.00). He told me that he actually spoke with manufacture engineer. Is there anyone that have updated new software to SBB and having any problems with machine? I really appreciate your feed back.

ovitanov
27th August, 2010, 05:18 AM
China SBB is possible to update with Win transfer.
I did it.

teerak2uk
28th August, 2010, 04:56 PM
China SBB is possible to update with Win transfer.
I did it.
LOL yes possible but probably diidnt work after as they need hardware change before update

devil09
28th August, 2010, 07:37 PM
LOL yes possible but probably diidnt work after as they need hardware change before update
china SBB update upto 28version t
after that if anyone need to update they have to buy new version 31.02.
it means you can update china SBB upto28version then buy new 31.02 version from them only .

mikeslocks
9th September, 2010, 06:16 AM
version 31 ie 2010 has only GM an accord 09 plus is buggy, GM does not work at all.

Dylan Chin
8th November, 2010, 04:50 AM
i think that rs232 cable cannot run in windows 7..right?

marginal
8th November, 2010, 05:16 AM
i think that rs232 cable cannot run in windows 7..right?
Of course it can.

teerak2uk
8th November, 2010, 09:43 AM
Of course it can.


he probably presumes that as his pc probably only has usb so he will need usb to rs232 adaptor


can be found on ebay

cqae
8th November, 2010, 10:48 AM
Got my v31 in the mail a few days ago. It came with an rs 232 cable but my computer does not have this port. What solution should I take?

Another cable?

or get a port for computer?

i just got mine with a the same cable, mine is v32, I would be careful about trying to update it with the supplied software, I think you will probably brick your sbb

marginal
8th November, 2010, 02:36 PM
he probably presumes that as his pc probably only has usb so he will need usb to rs232 adaptor


can be found on ebay
The new USB to RS232 adapters install automatically on the new OSs ...
No need to run an installation software.

maxsek
8th November, 2010, 08:41 PM
what is the hardware different to sbb 2009 v28 to sbb2010????
Please post a photo of internal hardware of clone sbb2010

marginal
9th November, 2010, 02:14 AM
what is the hardware different to sbb 2009 v28 to sbb2010????
Please post a photo of internal hardware of clone sbb2010
I believe one of the differences is that the V32 can program keys for Honda without needing a PIN ...

Bishop c4
9th November, 2010, 03:26 PM
what is the hardware different to sbb 2009 v28 to sbb2010????
Please post a photo of internal hardware of clone sbb2010

check for yourself
I hope help you

Regards

DottoreBL
10th November, 2010, 10:32 AM
I have Silca TPS , can i do update ?

bbgcell
22nd December, 2010, 01:44 AM
hello friends descupme be posted in the wrong place, I'm in sao paulo Brazil sbb clones have usually upgraded to v 33 I believe called several times normal after only appears green screen without algaritimos have any solution

randewoo
14th January, 2011, 04:42 PM
May I ask somebody share contents of ATMEL ATF16V8b chip from his SBB which does updates?
I think they modified it's content to prevent erasing one of the chips. This IC is in the socket (in my case).

Meat-Head
16th January, 2011, 06:06 PM
May I ask somebody share contents of ATMEL ATF16V8b chip from his SBB which does updates?
I think they modified it's content to prevent erasing one of the chips. This IC is in the socket (in my case).

So sorry, not able to read mine, would do if i could.

Try PM member Kevfield or kody_2004.

Out of curisity, add some 'fake' customers to the data base and read again, see if that is where stored?

Twist
6th March, 2011, 09:44 PM
Hi there frends, i read all posts and i want to ask you something to be a shour, I have SBB chinese (clone) and it is a 28.00 version

someone say that you can't update it because it don't have RS232 el circut and in newer version of SBB have new chip?
is that right? but if you mean on a chip (EEPROM) can we change old one with a bigger eprom? i think inside is 24c16? i am not sure.

the main qestion did i can update my SBB on new V33 or light version?

thank in advance

all the best

Twist
8th March, 2011, 01:56 AM
anyone? :smokin:

paul_12345
8th March, 2011, 02:02 AM
read the thread that Bishop c4 (http://www.digital-kaos.co.uk/forums/members/134545-bishop-c4/) posted a link to for you on the other thread you asked about it.. then try it! if it dont work you've got your answer

Twist
8th March, 2011, 02:29 AM
read the thread that Bishop c4 (http://www.digital-kaos.co.uk/forums/members/134545-bishop-c4/) posted a link to for you on the other thread you asked about it.. then try it! if it dont work you've got your answer

where is bishop c4 post? i can't find?

paul_12345
8th March, 2011, 02:40 AM
where is bishop c4 post? i can't find?

If you go to your profile and view all your post then look for the one you posted before then click it and read the post after.

But its this link.

http://www.digital-kaos.co.uk/forums/f177/updating-duplicate-sbb-fault-169793/

Twist
8th March, 2011, 03:14 AM
If you go to your profile and view all your post then look for the one you posted before then click it and read the post after.

But its this link.

http://www.digital-kaos.co.uk/forums/f177/updating-duplicate-sbb-fault-169793/

Thanks man :barscarf:

mladen76
8th March, 2011, 09:31 AM
regards to all,maybe I am a litlle out of subject but does enybody have SSB looking like this,is it any good,price is 158 usd so is it a bit chep for this unit??

And to edit my post,I took picture from chinaobdshop but strongly recomend NOT TO BUY FROM THESE THIEVFS...

Twist
25th March, 2011, 01:24 AM
Hi there For ALL! Go here >>>>>> http://www.digital-kaos.co.uk/forums/f177/updating-duplicate-sbb-fault-169793/index16.html#post1029312 <<<<< and you can read STEP BY STEP how to update SBB With V33.01


CHEERS!!!! :party:
:star: :dancing: :) :burnout: :girlshit:

Rayone
7th February, 2012, 05:32 AM
Hello, I'm new to the forum and would like some information, I bought an sbb from china and it came with version 33.02 more I would like to put the version 33.01 which is a version of GM to read pin and pin VW until 2009, anyway. I tried to upgrade anyway, and got nothing, so I decided to open the machine to see if there was anything wrong when I saw that the RS232 port was not connected in the circuit of sbb. So what to do? someone help me? I tried connecting again I have not had success. thank you

thiburco
9th February, 2012, 12:47 PM
Hello friends! I need the version 33.01 which GM read pin
Please!!
Thanks!

brchip
2nd August, 2012, 11:16 PM
Hello, I'm new to the forum and would like some information, I bought an sbb from china and it came with version 33.02 more I would like to put the version 33.01 which is a version of GM to read pin and pin VW until 2009, anyway. I tried to upgrade anyway, and got nothing, so I decided to open the machine to see if there was anything wrong when I saw that the RS232 port was not connected in the circuit of sbb. So what to do? someone help me? I tried connecting again I have not had success. thank you
Same here! Anyone knows if it's possible to downgrade from 33.02 to 33.01?

turbocip
16th July, 2013, 07:38 PM
Hola todos ...
When you connect it alone, what do you see on the screen after boot up?

Can someone help ?
I press Can Update in Setup ... when i was into a car ... and my SBB wont boot ... boot for 1.2.3 seconds and after that ... black screen
Its new version 33. if i remember ...
How can i do fix this problem ?
Thanks to all

devil09
15th August, 2013, 03:59 PM
you have to do update thru computer with data file of33 version which must be offline

bubu782001
28th September, 2013, 03:23 PM
Can someone share a photo with rs232 cable? I want to find out wire connection from PCB to DB9.
We have 9 wire flat cable. I need to know where goes each wire to DB9 connector.

ex. wire 1 goes to pin X from DB9, wire 2 goes to pin Y from DB9 etc.

I have chip LT1133ACSW and connector and flat cable.

Thank you.

gtsolar
25th June, 2018, 04:16 PM
Hello I am looking for the SBB 28.00 update. Maybe you can help me.
Cheers gtsolar

DiagExpert
28th June, 2018, 10:11 PM
when i turn on the tool it gives DEVICE MISMATCH message does anyone know what it could be.

Regards

gregrimaster
10th October, 2018, 11:54 AM
Well, after the update my SBB stopped working.
Only a blank backlit screen after the power cable is plugged in.

georgetfs
11th October, 2019, 10:07 AM
THE UPDATE WORKS TO SBB CHINA????/OR ITS GOING TO CRASH

SAMUELTURPIN413
17th September, 2022, 02:36 PM
thanx for your share file do you have a latest update please