ST L9113 datasheet

[kobelco]

Hello everyone.
Someone can help me find datasheet of ST L9113, present in an ECU IAW 4AF.
thanks
Regards

[kobelco]

Nobody can help me!

[keycar]

hello friend,this but I am not sure if you got a picture ,,,,, serving component??


L9113 datasheet, l9113 series data sheet (http://www.utsource.net/ic-datasheet/L9113-1319030.html)

[kobelco]

Thanks my friend, but there is no datashhet in your link.
Photo of l9113:
L9113-OBDAUTO--BMW OPS VAG-COM,Tacho Universal,KWP2000,BMW Scanner,BMW Carsoft,ELM323,Code Reader,Can-bus (http://www.obdauto.com/views.asp?hw_id=473)

[RadovanPetkovic]

I am looking for it after 10 years and I have the same problem. There is no datascheet anywhere, the only thing I came across is this.


If only someone would write how this regulator can be tested

[AlexM41]

I am looking for it after 10 years and I have the same problem. There is no datascheet anywhere, the only thing I came across is this.


If only someone would write how this regulator can be tested

Thank you for info. I also found CAN inputs and outputs and K-line input. Also measured voltages at every pin while ignition on. If somebody needs will make a picture.
Do you know are all L9113 are the same or there are different versions coded in second line of marking? I replaced the "111AC" chip (which had broken K-line input) with "6995W"-version from Ali, after that engine does not start, digital supply become 3.3V instead of 5V, another 5V voltage became 7V, some other 0V. In same time CAN works, so it is not completely different IC in same package.