PDA

View Full Version : help & advice on bdm 100



martand
21st February, 2010, 12:44 AM
hi guys wonder if you can help, ive got a 206 with ecu problem. ive got two more ecus in the shed but they need to be wiped . i looked at a bdm interface a while ago and im sure the manual said it would work on mm 1ap.81 but ive looked through the descriptions on ebay and cant see a description giving that ecu make. can you help? many thanks guys!:dontknow:

tehnosoftex
21st February, 2010, 08:44 AM
Hi, remove the cover of the ecu and if you will see the motorola or freescale mcu type mpc5xx with bga form, then the bdm interface will work. For details look at http://www.evc.de/ftp/winols/BDM100en.pdf
Regards
Sorin

bricolo
21st February, 2010, 08:48 AM
hi
and BDM works fine with mpc5xx
i use it

busaman
21st February, 2010, 05:57 PM
ok ihave a clone bdm100 just are you supposed to connect to the able then to the ecu if you look at the pics you will see what i mean.

bricolo
21st February, 2010, 06:36 PM
look this item
BDM100 ECU spring loaded probe adapter 12 position : eBay Motors (item 250430088180 end time Mar-18-10 23:15:37 PDT) (http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=250430088180&viewitem=&sspagename=STRK%3AMEWNX%3AIT)
i'll post picture

bricolo
21st February, 2010, 06:52 PM
picture flashing edc16c34 with BDM

busaman
21st February, 2010, 07:03 PM
yes i have those pin sets but how do you connect to marelli with them. if you buy a clone bdm100 there is no way you can use it.

bricolo
21st February, 2010, 07:38 PM
you must solder pads to connect socket

busaman
21st February, 2010, 08:14 PM
i can see how it goes to the board but the plug does not fit on it its female to female if you look on the seimans adaptor why do they not have a socket to fit the plug.