bmw e60 535d 272ps stage 3 control sw please

[dejvinho]

Hi, I have a problem with my car, the car has a hybrid turbos, big ic, egr, dpf, maf off, downpipe and custom exhaust, the sw is set to 2.5b boost and 105mg fuel, but the car will only do 2.0-2.1b max. I checked everything and tried to replace a lot of parts, but the problem is still the same, the car gives 105mg of fuel without a problem, but boost is a problem. Can someone please check my software if there is an error somewhere? maybe miss some maps, limiter. Thank you:untroubled:

[gtgeo]

hi mate i had a quick look can't see anything out of place but for the purpose of a test if you have the MAF and can reconnect it ive done a file for you which should hit the boost you want its not as aggresive as your map but its about as far as i would go keeping it safe without logs. Sometimes the MAP sensor isn't up to the job which one are you useing? if you can try this map and take logs we should be able to tell if its a hardware issue or just the map if so with logs i can continue with the tune ive done for you( i modified your ori file).

[dejvinho]

thank you for your help, but the car on your software does not start, i have a 2700b sensor, linearization must be done. Log is not a problem I can do everything or record video live data from diag

[gtgeo]

if you write the ori software will it start?

[dejvinho]

no, because I have a rail pressure sensor from f10 550d, linearization sensor has to be done

[gtgeo]

ok im with you now is it the standard fuel rail or is that off an other vehicle? ill look into your mod file more in depth now. do you have boost logs?

[gtgeo]

ok try this and let me know what happends when your on boost if possible take boost logs for me

[waldi1979]

no, because I have a rail pressure sensor from f10 550d, linearization sensor has to be done

So set 0xF4E2A and 0xF4E2C 18000->27000 and start the car.

[dejvinho]

ok im with you now is it the standard fuel rail or is that off an other vehicle? ill look into your mod file more in depth now. do you have boost logs?
ok mate, thank you for your help next week I will contact you at message and send you a log

[gtgeo]

ok mate take care