Jeep Wrangler 2017 C76 Nano help please...

[apexseal]

Can somebody tell me if the correction is ok? Original is 59390 Miles, modified should be 20000 or close... Rar says 2007 but it was a typo...

[aem]

is ok.........

[apexseal]

Anybody has a power up for this? Thanks + rep will be given.

[Cllau]

here...
:wink:

[apexseal]

The one I modified gave error on the odometer, gas and rpm gauges not working... Gonna try yours tomorrow...

[Cllau]

try first your ori then mine....:captain:

[apexseal]

Ok... Will do...

[apexseal]

Tried your file and original but still get error. Did the self test but needles don't sweep and left display does not work...

[apexseal]

tried by obd2 and was able to correct mileage but gauges and left side display still don't work. If I disconnect the cluster from the vehicle it displays error again. No trouble codes on the scanner.

[n599fbm]

Verify your dump is not in swap

[apexseal]

Dump and modified is in first post, I read in circuit with iProg normal mode.

[apexseal]

I can read "contact dealer" on the ascii side so I guess it's not swapped.

[apexseal]

Right side lcd (odometer side) works, all warning lights and messages show up (door etc)... Gauges and left side are dead.

[apexseal]

If I remove power from vehicle or disconnect the cluster the odometer goes back to error when connected. I can read the eeprom and the info is there. If I program on the bench it shows error if I program via obd2 mileage shows but if battery is disconnected it displays error again.

[waltermanuel]

that is a normal legend of the dump is in all those dumps, check the plate well.........is the overturned of the vehicle?

[n599fbm]

wait a minute,
Im prepare the new dump

[n599fbm]

try this dump,

inform the new results

[n599fbm]

What Happened ???'

[apexseal]

I just saw the message...

[apexseal]

Customer is coming back on monday...

[apexseal]

I'll let you know as soon as I work on it. Could I have written the wrong bin? He says that it used to have "ECO' option on the odometer menu(right display) and outside temp on the left display. Now it reads outside temp on the right display and no "ECO" option.

[apexseal]

Customer called he'll be here later today so I'll keep you posted...

[n599fbm]

you will write my dump on the table, not by OBDII

[apexseal]

It was two tiny traces at two points... My calculation was good. Thanks for all your help!!!