Peugeot 207 cc 1.6 THP - Pop & Bang

[krokodyl30]

Hello everyone, I have a private Peugeot 207 cc 1.6 THP on ECU MED17.4.2. The car has the original exhaust system and the catalyst removed. I would like to get the Pops & Bang effect and possibly turn off the rear lambda sensor monitoring the condition of the catalyst. I read the file using KESS 5.017 after OBD. If it is possible, I would be grateful for your help! Regards!

[Jvmotor3]

PASS FOR PM.

[eggystar]

Hello everyone, I have a private Peugeot 207 cc 1.6 THP on ECU MED17.4.2. The car has the original exhaust system and the catalyst removed. I would like to get the Pops & Bang effect and possibly turn off the rear lambda sensor monitoring the condition of the catalyst. I read the file using KESS 5.017 after OBD. If it is possible, I would be grateful for your help! Regards!

HERE POPS-LAMBDA (https://mega.nz/file/ebxgHIjZ#ya8W1DnsDeUQ5VsqerxNxLy93o2Yx4VEiW8pSjARA MU)

[krokodyl30]

Thank you! I will test the files and report it!

[krokodyl30]

Unfortunately, your file doesn't work. I made similar changes to the file and the car didn't respond to them either.

[krokodyl30]

Unfortunately, neither of these solutions work! No shooting effect on the exhaust system.

[krokodyl30]

Is it possible that the file read after the OBD is not enough? Maybe you need a full flash reading to do this job correctly? On these files the car will jerk when accelerating and occasionally shoot at the exhaust system, but very weakly. I tried to reset the ignition by larger values, max to -40 and still not working properly.

[Shaqkel]

Probably missing Fuel cut or done on wrong KFW maps