PDA

View Full Version : kyron immo off dcm3.2ap



sokolomo
28th April, 2022, 05:43 PM
hello
Could anyone help me to disable immo in ssangyong kyron ecu delphi DCM3.2AP A655 540 84 32 27DT?
Thank you very much

alpntrb
28th April, 2022, 06:05 PM
give this a go and report

clear your inbox for pass

sokolomo
29th April, 2022, 08:20 AM
could you give me pass please? thank's

sokolomo
29th April, 2022, 12:01 PM
car start but throttle doesn' t respond, dtc cannot erase,
P0630 variant coding is not done,
P0602 ecu program fault
P0631 variant coding writing error
P0619 multi calibration performing error
P0611 inj control module performance
help please

rafal
29th April, 2022, 08:18 PM
car start but throttle doesn' t respond, dtc cannot erase,
P0630 variant coding is not done,
P0602 ecu program fault
P0631 variant coding writing error
P0619 multi calibration performing error
P0611 inj control module performance
help please

then write this one...................

sokolomo
30th April, 2022, 01:05 PM
pass please

sokolomo
5th May, 2022, 10:26 AM
then write this one...................

Pass not yet received

rafal
5th May, 2022, 12:04 PM
Pass not yet received

sent...............sorry for delay

sokolomo
22nd May, 2022, 05:10 PM
then write this one...................

sorry for delay car is far from me, tested file and always same problem, engine speed don't exceed 1200rev/mn, what is wrong? is there a procedure to follow? any idea please

volodin69
22nd May, 2022, 06:35 PM
Did you disconnect immo box?
Best way was delete all dtcs before taking ecu apart from the car, then write immo off eprom, better with write protect. Remove immo box, connect the ecu and battery and start the car. Should work. Of course, if immo off was propperly made.
Btw, check if AC works after immo off :)

all4
23rd May, 2022, 10:11 AM
i have solution work without error

......................your car star????

sokolomo
25th May, 2022, 10:41 AM
i have solution work without error

......................your car star????
??car start but don't accelerate, could you share your solution please

sokolomo
25th May, 2022, 10:46 AM
Did you disconnect immo box?
Best way was delete all dtcs before taking ecu apart from the car, then write immo off eprom, better with write protect. Remove immo box, connect the ecu and battery and start the car. Should work. Of course, if immo off was propperly made.
Btw, check if AC works after immo off :)
maybe I'm wrong, immo box is connected to the reading coil of the starter switch? is it exact or not

sokolomo
25th May, 2022, 10:49 AM
sorry immo box is the box connected to ignition switch read coil?

lion0304
25th May, 2022, 11:09 AM
sorry immo box is the box connected to ignition switch read coil?

If you don't know how to work with immo OFF, don't blame solution.

Does file is original from car or someone already modified before? Coil must disconnected.

sokolomo
30th May, 2022, 06:02 PM
If you don't know how to work with immo OFF, don't blame solution.

Does file is original from car or someone already modified before? Coil must disconnected.
I'm sorry i did not mean to blame anyone, it is just because i did not know if immo box( near ignition switch) was the right thing i had to disconnect or there is something else??
file is original for car

Karlo123
14th July, 2022, 02:51 PM
hi did you find solution