Tractors Soft and firmware are welcomed HERE

[Sheer]

Yo!
Just a little thread in order to regroup some useful tools for tractors (JD,C.New holland...) like ECU programmers,Hours Modifiers.,schematics....

i hope i will post some few things as soon as possible...

thanx for all the people who are going to post here..:wink:

[pinch]

This thread I know I will be watching to see what might pop up here.

[Felix8]

Is there something you need?

[DB_member]

JD service advisor 2.8 was posted some time ago but it seems like nobody was able to install it properly. I'd be interested about Fendt tools too.

[magicshoot]

Dudes not into this stuff but hope this helps injoy

[kike_j]

If it's possible, I would like to read or have any pdf about technical data of nowadays Mccormick tractors, but only for small hp range, if you post for all range, I don't mind ;)
I refer something similar of pdf DEUTZ-FAHR which had posted some time ago.
Thanks and sorry for my english

[magicshoot]

Like I said above dont know to much a tractors so I hope this upload starts u all off

[me58]

Fendt (Epsilon) 2010
:giveup:

[DB_member]

Fendt (Epsilon) 2010
:giveup:

Did anyone succeed installing this? I did not find instructions for the keys and the database installation instructions were not easy to follow. The program installs fine but I get a crash message when trying to copy data.

[mr.smart]

Yo!
Just a little thread in order to regroup some useful tools for tractors (JD,C.New holland...) like ECU programmers,Hours Modifiers.,schematics....

i hope i will post some few things as soon as possible...

thanx for all the people who are going to post here..:wink:

Here a lot of people looking the same for forklifts too.

Regards
mr.smart

[mitke1]

Fendt (Epsilon) 2010
:giveup:



not 2010, already in 2008

[kenani]

Great topic m8!

[richdo66]

Yo!
Just a little thread in order to regroup some useful tools for tractors (JD,C.New holland...) like ECU programmers,Hours Modifiers.,schematics....

i hope i will post some few things as soon as possible...

thanx for all the people who are going to post here..:wink:
Some of you will find this useful
RapidShare: 1-CLICK Web hosting - Easy Filehosting (http://rapidshare.com/files/420114270/Fendt_700-800_w-s_manual.pdf.html)

[richdo66]

oops .This is the one[/URL][url]http://rapidshare.com/files/420921698/Fendt_700-800_w-s_manual.pdf.html (http://rapidshare.com/files/420921698/Fendt_700-800_w-s_manual.pdf.html)

[fastsailor]

hello

a need a shop manual for fendt 207 s

give me a link

thanks

[colh]

[QUOTE=Sheer;468769]Yo!
Just a little thread in order to regroup some useful tools for tractors (JD,C.New holland...) like ECU programmers,Hours Modifiers.,schematics....

i hope i will post some few things as soon as possible...

thanx for all the people who are going to post here..:wink:[/Q
Here is CNH EST no key emulator yet.Includes Case ag and construction.New Holland Ag and const O&K Steyr flexicoil etc
http://rapidshare.com/files/433393227/EST6100_1__D_.part01.exe
http://rapidshare.com/files/433393228/EST6100_1__D_.part02.rar
http://rapidshare.com/files/433393219/EST6100_1__D_.part03.rar
http://rapidshare.com/files/433393640/EST6100_1__D_.part04.rar
http://rapidshare.com/files/433394311/EST6100_1__D_.part05.rar
http://rapidshare.com/files/433401484/EST6100_1__D_.part06.rar
http://rapidshare.com/files/433658361/EST6100_1__D_.part07.rar
http://rapidshare.com/files/433408875/EST6100_1__D_.part08.rar
http://rapidshare.com/files/433440800/EST6100_1__D_.part09.rar
http://rapidshare.com/files/433443535/EST6100_1__D_.part10.rar

[uzara]

Hi colh
Can you tell me which version of New Holland is that?
Thanks
Regards

[colh]

Hi colh
Can you tell me which version of New Holland is that?
Thanks
Regards

6100 CNH EST

[uzara]

[QUOTE=Sheer;468769]Yo!
Just a little thread in order to regroup some useful tools for tractors (JD,C.New holland...) like ECU programmers,Hours Modifiers.,schematics....

i hope i will post some few things as soon as possible...

thanx for all the people who are going to post here..:wink:[/Q
Here is CNH EST no key emulator yet.Includes Case ag and construction.New Holland Ag and const O&K Steyr flexicoil etc
http://rapidshare.com/files/433393227/EST6100_1__D_.part01.exe
http://rapidshare.com/files/433393228/EST6100_1__D_.part02.rar
http://rapidshare.com/files/433393219/EST6100_1__D_.part03.rar
http://rapidshare.com/files/433393640/EST6100_1__D_.part04.rar
http://rapidshare.com/files/433394311/EST6100_1__D_.part05.rar
http://rapidshare.com/files/433401484/EST6100_1__D_.part06.rar
http://rapidshare.com/files/433658361/EST6100_1__D_.part07.rar
http://rapidshare.com/files/433408875/EST6100_1__D_.part08.rar
http://rapidshare.com/files/433440800/EST6100_1__D_.part09.rar
http://rapidshare.com/files/433443535/EST6100_1__D_.part10.rar

Hi
Have you only the software or have you the dongle ,too?
:banghead:
regards

[colh]

[quote=colh;904416]

Hi
Have you only the software or have you the dongle ,too?
:banghead:
regards
only software at moment

[teerak2uk]

[quote=uzara;905675]
only software at moment

Maybe it would have been a good idea to state that in your first post to save people the time in downloading only to find it wont work because of the missing dongle

[PremierD]

And are Tractor Software links exempt from the ban then mate ..?

[teerak2uk]

Oh yeah now you come to mention it PremierD it would not be exempt

[colh]

[quote=colh;905840]

Maybe it would have been a good idea to state that in your first post to save people the time in downloading only to find it wont work because of the missing dongle

I am very sorry to inconvenience you but I did say it in original post[no key or emulator available]so I do not think I need to apologize just yet.And no your post was not very helpful and asking to be thanked all the time wears a bit thin too.

Thanks Premier D for enlightening him.

[KatoJan]

Have someone try the Cracklock with the Service Advisor?

[jht]

Have someone try the Cracklock with the Service Advisor?

Check your private message inbox

[anoriega]

is the install disk o complete? all 3 DVD?

thankk you very much for shared...

[colh]

is the install disk o complete? all 3 DVD?

thankk you very much for shared...

Is only 1 disc installation.Far as I know is all.I have it and working but do not have hardware key to do dump on.

[treemover]

Cheers lads!

[hubavoto]

hi!!
...I need some docs for Case MXM 155 tractor. Is there somebody to give me help?:goodpost:

[Mikhail]

Hello,
Does anyone have a dump key is CASE IH EST?
Thank you very much for your help!

[Benek]

Somebody have a workshop manual, for Fendt 900 Vario?

[DarkHorse]

Hello,

Does anyone have a CHN EST 6.4?
6.3 will stop works 15.07.2011

Thank you very much for your help!

[395112801]

Case Corporation of China at this stage not only CHN EST 6.3 update. Should be updated before expiration, I can share. Someone to share fully functional crack it?

[uzara]

Case Corporation of China at this stage not only CHN EST 6.3 update. Should be updated before expiration, I can share. Someone to share fully functional crack it?

Hi
What do you mean with "fully functional crack" ?
I am interrested for the update
Please update if you can

regards

[395112801]

Hi
What do you mean with "fully functional crack" ?
I am interrested for the update
Please update if you can

regards

Sorry, my upload speed limit is 50K, my 6.3-uploading


(fully functional crack")
Electronic Service Tool 6.3 - full diagnostic and repair manual for New Holland, Kobelko, CASE, Steyr, Flexicoil, FK, O&K. Construction and Agriculture equipments.


New Holland Electronic Service Tools (CNH EST 6.3), diagnostic software for engines and vehicles - New Holland - epc-software.com - Spare parts catalogue, service manual (http://epc-software.com/New-Holland-Electronic-Service-Tools-CNH-EST-6-3-diagnostic-software-engines-vehicles.html)

[uzara]

Sorry, my upload speed limit is 50K, my 6.3-uploading


(fully functional crack")
Electronic Service Tool 6.3 - full diagnostic and repair manual for New Holland, Kobelko, CASE, Steyr, Flexicoil, FK, O&K. Construction and Agriculture equipments.


New Holland Electronic Service Tools (CNH EST 6.3), diagnostic software for engines and vehicles - New Holland - epc-software.com - Spare parts catalogue, service manual (http://epc-software.com/New-Holland-Electronic-Service-Tools-CNH-EST-6-3-diagnostic-software-engines-vehicles.html)


Hi
i have EST6300 1DVD
I need DVD 2 -4
You have?
regards

[sync79]

a crack for the program CNH EST 6100
but I have no adapter
who can verify the functionality of the program

[sync79]

who can help in purchasing an adapter DEARBORN DPA-5

[thermo_1]

Here is the disk I have from dealership. If you like press the thanks and pm me for password:wavey:

https://rapidshare.com/files/3021659852/Mccormick.rar

[thermo_1]

I believe I have manuals for mccormick if anyone needs them

[linkic]

Hi,

please help me, i need key for AGCO Epsilon - Fendt 2016

Thanes

[whatno]

Can anyone help with Algo to read and write to John Deere L14, L15 and L21 ECU?