2010 Accord eeprom location

[DaGige]

Hello. I am trying to change the mileage on a 2010 honda accord

I think I need to connect pins at the back of the board. I found this picture

https://ibb.co/LQCWLnW

Do I use the Carprog A10 adapter? there is 10 wires. Can someone please tell me which wires to use and where?

Thanks

[DaGige]

can I tape them to the board instead of soldering?

[DaGige]

anyone please?

[Etownbrawler]

Need to use the A4 carprog adapter ,it has 8 wires but on the 93c76 eeprom only pins 1,2,3,4,5,8 need to be connected to program. Have to confirm your A4 cable pinout so you know what wires go to what pins,tons of carprog pinouts on dk . Don't rely on wire colors either for A4 ,either use a ohm meter on continuity or take the 25 pin cover off and confirm what color wires are for what eeprom pins . I guess you could try to tape the wires on but you should really solder them on to get a good connection.

[alsa75]

Hello,
As I saw the picture, I'm confuse, which one is Pin 8 because there are two small holes in my cluster, but in this picture the 8 covers them.

https://ibb.co/LQCWLnW

Can someone confirm that this is the correct pin out for Honda.
I'm trying to change miles on 2009 Honda Accord.

Thank you

[Merco97]

[QUOTE=DaGige;4341352]Bonjour. J'essaie de changer le kilométrage sur un honda accord 2010,

je pense que je dois connecter des broches à l'arrière de la carte. J'ai trouvé cette image

https://ibb.co/LQCWLnW

Est-ce que j'utilise l'adaptateur Carprog A10 ? il y a 10 fils. Quelqu'un peut-il me dire quels fils utiliser et où ?

Merci[/CITATION] supprimé l'eeprom 93c86 plus simple

[epd1221]

here better pic