Nissan TIIDA 2007, diesel all keys lost wrong pincode

[vialli]

The owner has only one key without content, in the glove compartment there is a 12-character label. I calculated the PIN and I tried to program a pcf 7936 on the OBD socket with OBDSTAR, I tried all the CAN systems. Every time OBDSTAR show me the wrong PIN (12 characters, see photo) and I failed the programming I have attached the label from glove box, calculated PIN and the BCM label I'll appreciate if you can confirm my PIN is OK Tried with XTOOL, autocalculate PIN (12 characters) and also failed, showed wrong PIN I have attached the label, the calculated PIN and the BCM label

[lion0304]

Pincode i get is: 5B 7A BA 32 F2 85 the same than you

Maybe key wrong? If use like K12, you cannot use 7936 but need key with 7946.

[vialli]

THANKS lion0304
You're absolutely right, the car only accepts the key with remote control pcf7946
I used the KD remote key and the car starts again

[musti418]

hi you can precode 7936 transponder.as nissan

[vialli]

I did this but the car no crank with pcf 7936, the only way is remote key pcf7946 to start the car


hi you can precode 7936 transponder.as nissan

[Manta1600]

THANKS lion0304
You're absolutely right, the car only accepts the key with remote control pcf7946
I used the KD remote key and the car starts again

I programmed micra AKL with XT27 precoded like - Micra remote key

with regular 7936 never had success

[vialli]

I programmed micra AKL with XT27 precoded like - Micra remote key

with regular 7936 never had success

Very interesting idea, I will test this at the first opportunity
By the way, the customer was very happy, the car started and the remote control worked

[lion0304]

I programmed micra AKL with XT27 precoded like - Micra remote key

with regular 7936 never had success

Yeah i see KD and Xhorse had this option but never try because i alway program with remote.

One or 2 times just clone if they want cheaper key.