PDA

View Full Version : Kia Ceed 2011 Radio code needed



marmae
5th June, 2022, 08:57 AM
After battery change there is a need for a code on the radio. Already tested 0000 and 1111 which does not work.

It's a 96160-1h050 radio with serial no. BS0210490006377

Thanks in advance for any help given!

Mankyro
5th June, 2022, 09:59 AM
After battery change there is a need for a code on the radio. Already tested 0000 and 1111 which does not work.

It's a 96160-1h050 radio with serial no. BS0210490006377

Thanks in advance for any help given!
Read dump 24c64

marmae
5th June, 2022, 10:04 AM
Sorry for beeing such a noob, but how do you read the actual dump from the eeprom? What tools are needed? thanks!

Mankyro
5th June, 2022, 10:09 AM
Sorry for beeing such a noob, but how do you read the actual dump from the eeprom? What tools are needed? thanks!
In any service, 24с64 you will read.

marmae
5th June, 2022, 10:29 AM
In any service, 24с64 you will read.

You mean I need to go to service workshop and pay them to get a dump of it? I can't read the eeprom myself with some tools?

shooting
5th June, 2022, 10:33 AM
You mean I need to go to service workshop and pay them to get a dump of it? I can't read the eeprom myself with some tools?

Do you have the tools to read the eeprom?

wbr

marmae
5th June, 2022, 10:44 AM
No, that's what I am asking for, what tools are needed? Is there a kit where I don't need to desolder the actual eeprom? Just remove the cover and read it from the pins and then pass that dump on to this board? And what software is recommended?

shooting
5th June, 2022, 10:49 AM
No, that's what I am asking for, what tools are needed? Is there a kit where I don't need to desolder the actual eeprom? Just remove the cover and read it from the pins and then pass that dump on to this board? And what software is recommended?

You'll need to unsolder the chip, put it in a programmer and read out the dump (Data File)
I'd use a TL866 programmer, but your soldering skills must be good...

wbr

marmae
5th June, 2022, 11:02 AM
Soldering skills are fine, so that's not an issue. Just thought there might be something that could be used without desoldering it. But thanks, then I know what's needed.

MalyKato86
24th April, 2024, 09:05 PM
Hello, I need help recovering the radio codes
Kia Ceed 1.4 2011
KIA ED FL 5 door with BT
96160-1H050
A2C53354153
BS0109490029542
03 0047

petronijul
24th April, 2024, 09:11 PM
Hello, I need help recovering the radio codes
Kia Ceed 1.4 2011
KIA ED FL 5 door with BT
96160-1H050
A2C53354153
BS0109490029542
03 0047

read dump...........